Le plus récent matériel de formation PMI PMI-001

C'est un bon choix si vous prendre l'outil de formation de Pass4Test. Vous pouvez télécharger tout d'abord le démo gratuit pour prendre un essai. Vous aurez plus confiances sur Pass4Test après l'essai de notre démo. Si malheureusement, vous ne passe pas le test, votre argent sera tout rendu.

On doit faire un bon choix pour passer le test PMI PMI-001. C'est une bonne affaire à choisir la Q&A de Pass4Test comme le guide d'étude, parce que vous allez obtenir la Certification PMI PMI-001 en dépensant d'un petit invertissement. D'ailleur, la mise à jour gratuite pendant un an est aussi gratuite pour vous. C'est vraiment un bon choix.

Participer au test PMI PMI-001 est un bon choix, parce que dans l'Industire IT, beaucoup de gens tirent un point de vue que le Certificat PMI PMI-001 symbole bien la professionnalité d'un travailleur dans cette industrie.

Quand vous hésitez même à choisir Pass4Test, le démo gratuit dans le site Pass4Test est disponible pour vous à essayer avant d'acheter. Nos démos vous feront confiant à choisir Pass4Test. Pass4Test est votre meilleur choix à passer l'examen de Certification PMI PMI-001, et aussi une meilleure assurance du succès du test PMI-001. Vous choisissez Pass4Test, vous choisissez le succès.

Le test certification PMI PMI-001 est une bonne preuve de connaissances professionnelles et la techniques. Dans l'Industrie IT, beaucoiup de humains ressource font l'accent de lesquels certificats que les volontiers obtiennent. C'est clairement que le certificat PMI PMI-001 puisse augmenter la compétition dans ce marché.

Code d'Examen: PMI-001
Nom d'Examen: PMI (Project Management Professional)
Questions et réponses: 625 Q&As

PMI-001 Démo gratuit à télécharger: http://www.pass4test.fr/PMI-001.html

NO.1 Which of the following represents the final task during project close-out?
A. Reassignment of team member.
B. Verification that contractual obligations were met.
C. Transferring the deliverables to the client.
D. Completion of performance/lessons-learned records.
Answer: C

PMI examen   PMI-001   PMI-001

NO.2 Which of the following should be done by the project manager upon completion of
the project?
A. Planning a turnover meeting.
B. Obtaining a sign-off from the customer.
C. Team celebration.
D. Project evaluation.
E. Performance evaluation of team members.
Answer: B

PMI   PMI-001   PMI-001   certification PMI-001

NO.3 Which of the following requires an expenditure of the resources when working
within an arrow diagramming method?
A. Histograms.
B. Accounting support costs.
C. Pareto diagram.
D. Milestone events.
E. Path activities.
Answer: B

PMI   certification PMI-001   PMI-001   PMI-001 examen   certification PMI-001

NO.4 Consider the following situation: The customer was given a monthly report that
indicates zero schedule variance. One of the teams members are aware of at least
one milestone that has not been achieved. This missed milestone will result in an
overall delay in the project.
Which of the following items were not reported on adequately?
A. Critical path status
B. Risk analysis
C. Communication plan variance
D. Resource management plan
E. All of the above
Answer: A

certification PMI   PMI-001 examen   certification PMI-001   PMI-001   PMI-001 examen

NO.5 Which of the following are indicative of duration estimates?
A. How many hours a resource will work on an activity.
B. When an activity is expected to start.
C. How many work periods an activity is expected to last.
D. When an activity is expected to finish.
Answer: C

PMI   certification PMI-001   PMI-001   PMI-001   PMI-001 examen

NO.6 Under which of the following circumstances would project management is the NOT
be the preferred management approach?
A. Cross functional tasks.
B. Unique operations.
C. Product manufacturing environment.
D. Time-constrained deliverables.
Answer: C

certification PMI   certification PMI-001   PMI-001   PMI-001

NO.7 In which of the following circumstances is it BEST to make use of the project
management approach? (Choose all that apply.)
A. Cross functional tasks.
B. Unique operations.
C. Product manufacturing environment.
D. Time-constrained deliverables.
E. Production-line environment.
Answer: A, B, D

PMI   PMI-001   certification PMI-001

NO.8 Which of the following is illustrated by a resource histogram?
A. The expected requirements for critical path activities.
B. The expected resource usage by time period.
C. The resource assignments by work package.
D. The resource assignments by activities.
E. All of the above.
Answer: B

PMI examen   PMI-001 examen   PMI-001

NO.9 The "Cost of quality" project management concept includes ____?
A. The costs involved when changes are made to the requirements
B. The costs of ensuring that requirements are conformed to.
C. The costs incurred when requirements are exceeded.
D. The costs involved with quality control requirements.
Answer: B

PMI   PMI-001   certification PMI-001   PMI-001   PMI-001

NO.10 Which of the following is NOT an essential regarding a project close-out?
A. Documenting formal acceptance of the product.
B. Documenting the final risk assessment.
C. Documenting the lessons learned.
D. Documenting the final project scope
E. None of the above.
Answer: B

PMI   PMI-001   certification PMI-001   PMI-001   certification PMI-001   certification PMI-001

NO.11 Which of the following represents a consequence to the project in the event of a
resource being added to the project team during execution?
A. Shorter project completion schedule.
B. An indeterminable effect.
C. A requirement for a scope change.
D. An increase in project quality.
Answer: B

PMI   PMI-001   PMI-001   PMI-001 examen   PMI-001 examen

NO.12 Which of the following factors are NOT included in cost control?
A. Preparation of cost estimates.
B. Informing stakeholders of changes.
C. Monitoring cost performance.
D. Recording appropriate changes to the cost baseline.
Answer: A

PMI   PMI-001   PMI-001 examen   PMI-001   PMI-001

NO.13 Which of the following describes Fast Tracking?
A. Circumventing loopholes.
B. Developing workarounds for previous problems.
C. Increased project risk.
D. Getting people to work longer hours in overtime.
E. Meeting schedule objectives by adding resources.
Answer: C

certification PMI   PMI-001   PMI-001

NO.14 Where does comparing actual to baseline schedules, examining the statement of
work, understanding cost overruns, and assessing risk all occur?
A. Stakeholder meeting.
B. Resource leveling activity.
C. Project audit.
D. Contract negotiation.
Answer: C

PMI   PMI-001   PMI-001

NO.15 When preparing the probability distribution of cost outcomes for a project, what is
the estimate with a 15% probability of being exceeded approximately one standard
deviation ___________?
A. Above the mean.
B. Below the mean.
C. Below the median.
D. Above the median.
Answer: A

PMI examen   certification PMI-001   PMI-001 examen

NO.16 Certain resources have been added to tasks on the critical path so as to reduce the
project duration. As a result the plan should then be reviewed for the:
A. Possible lag time on other paths.
B. Resource assigned to other tasks on the critical path.
C. The most time consuming task remaining in the plan.
D. Emergence of a new critical path.
Answer: D

PMI   PMI-001 examen   certification PMI-001   PMI-001 examen

NO.17 Which of the following is the distinguishing characteristic between the network
diagram and the Gantt chart?
A. Few resources
B. Key milestones
C. Critical dates
D. Critical dependencies
Answer: D

certification PMI   certification PMI-001   certification PMI-001   certification PMI-001

NO.18 Which of the following represents the pinnacle of Maslow's hierarchy of needs?
A. Survival.
B. Self-actualization.
C. Safety.
D. Esteem.
E. Physiological satisfaction.
Answer: B

PMI   PMI-001 examen   PMI-001   certification PMI-001   certification PMI-001

NO.19 Which technique would you be using if you analyze which sequence of activities has
the least amount of flexibility when you need to predict project duration?
A. Critical path
B. Dependency diagramming
C. PERT
D. Gantt chart
E. Monte Carlo method
Answer: A

PMI examen   PMI-001   PMI-001 examen   certification PMI-001   PMI-001

NO.20 Which of the following is NOT an indirect cost?
A. Insurance costs.
B. Payroll tax cost.
C. Subcontract costs.
D. Accounting support costs.
Answer: C

certification PMI   PMI-001 examen   PMI-001   certification PMI-001   PMI-001 examen   certification PMI-001

NO.21 Which of the following statements depicts the key difference between contract
close-out and administrative closure?
A. Contract close-out formalizes project completion.
B. Contract close-out includes product verification.
C. Contract close-out includes updating records with final results.
D. Administrative closure includes procurement audits.
E. None of the above.
Answer: B

PMI   certification PMI-001   PMI-001 examen   PMI-001   PMI-001 examen

NO.22 What would be the cost performance index if BCWP =350, ACWP = 400, and BCWS = 325? Note:
Budgeted Cost of
Work Performed (BCWP), Actual Cost of Work Performed (ACWP) and Budget Cost of Work Schedule
(BCWS)
A. 0.813
B. 1.078
C. 1.143
D. 0.875
Answer: D

PMI   PMI-001   PMI-001   PMI-001   certification PMI-001

NO.23 Which of the following statements BEST describes what project progress reports
are?
A. It is used to predict future status and progress.
B. The project sponsor makes the most use of it.
C. It is an important communications element.
D. It is needed on a weekly basis.
Answer: C

PMI examen   PMI-001   PMI-001   PMI-001

NO.24 What does a benefit-cost ratio of 3.22 indicate?
A. A profit of s3.22 per unit produced.
B. A payback of s3.22 for each dollar expended.
C. The percentage of resources assigned to other tasks on the critical path.
D. The gold plating result.
E. A profit of s3.22 for each dollar expended.
Answer: B

certification PMI   PMI-001   certification PMI-001   PMI-001   certification PMI-001   PMI-001

NO.25 Taking the following table into account, where would corrective action be MOST
effective when you make use of Pareto's Rule?
Origin of Problem Percent of Problems
Design 60
Development 15
Prototype 10
Testing 10
Fabrication 5
A. Development
B. Prototype
C. Fabrication
D. Design
E. Testing
Answer: D

PMI   PMI-001   PMI-001 examen   PMI-001 examen

NO.26 Which of the following is the MAIN reason for including incentive clauses in a
contract?
A. Reducing costs to the buyer.
B. Controlling contractor costs.
C. Aligning contractor and buyer goals.
D. Reducing production costs.
E. Reducing contractor risk.
Answer: C

PMI   PMI-001   PMI-001   PMI-001   PMI-001

NO.27 Which of the following are included in cost control? (Choose all that apply.)
A. Informing stakeholders of changes.
B. Preparing cost estimates.
C. Recording appropriate changes to the cost baseline.
D. Monitoring cost performance.
Answer: A, C, D

PMI   certification PMI-001   PMI-001

NO.28 Which of the following is NOT included in activity duration estimated?
A. Project team knowledge.
B. Commercial duration databases.
C. Time studies.
D. Information from previous experience.
E. None of the above.
Answer: C

PMI   PMI-001   PMI-001 examen   certification PMI-001

NO.29 Which of the following represents the BEST process to accomplish resource
planning?
A. Identifying the required resources in the project charter
B. Identifying the available resources and allocate them to all activities in the current
phase of the project.
C. Identifying the required resources and allocate them to all project activities.
D. Identifying the resources that performed past similar projects, and allocate them to all
project activities
E. None of the above
Answer: C

PMI examen   PMI-001   PMI-001

NO.30 What is the job title of the person who is primarily responsible for the quality of
deliverables?
A. The quality control inspector.
B. The quality controller.
C. The design engineer.
D. The project manager.
E. The quality manager.
Answer: D

certification PMI   certification PMI-001   PMI-001

Pas besoin de beaucoup d'argent et de temps, vous pouvez passer le test PMI PMI-001 juste avec la Q&A de PMI PMI-001 offerte par Pass4Test qui vous offre le test simulation bien proche de test réel.