Les produits de Pass4Test sont recherchés par les experts de Pass4Test qui se profitent de leurs connaissances et leurs expériences dans l'Idustrie IT. Si vous allez participer le test Juniper JN0-343, vous devez choisir Pass4Test. La Q&A de Pass4Test peut vous aider à préparer mieux le test Juniper JN0-343 avec sa grande couiverture des questions. En face d'un test très difficile, vous pouvez obtenir le Certificat Juniper JN0-343 sans aucune doute.
Finalement, la Q&A Juniper JN0-343 plus nouvelle est lancé avec tous efforts des experts de Pass4Test. Aujourd'hui, dans l'Industrie de IT, si on veut se renforcer sa place, il faut se preuve la professionnalité aux les autres. Le test Juniper JN0-343 est une bonne examination des connaissances professionnelles. Avec le passport de la Certification Juniper, vous aurez un meilleur salaire et une plus grande space à se développer.
Le Pass4Past possède une équipe d'élite qui peut vous offrir à temps les matériaux de test Certification Juniper JN0-343. En même temps, nos experts font l'accent à mettre rapidement à jour les Questions de test Certification IT. L'important est que Pass4Test a une très bonne réputation dans l'industrie IT. Bien que l'on n'ait pas beaucoup de chances à réussir le test de JN0-343, Pass4Test vous assure à passer ce test par une fois grâce à nos documentations avec une bonne précision et une grande couverture.
Nous assurons seulement le succès de test certification, mais encore la mise à jour est gratuite pour vous. Si vous ne pouvez pas passer le test, votre argent sera 100% rendu. Toutefois, cette possibilité n'est presque pas de se produire. Vous pouvez tout d'abord télécharger le démo gratuit pour prendre un essai.
Code d'Examen: JN0-343
Nom d'Examen: Juniper (Juniper Networks Certified Internet Specialist (JNCIS-ENT))
Questions et réponses: 393 Q&As
Aujoud'hui, c'est une société de l'informatique. Beaucoup d'organisations peut provider l'outil de se former pour le test Certification Juniper JN0-343. Mais on doit admettre que ces site n'ont pas la capacité à offrir une bonne Q&A, elles sont généralement très vagues et sans les points. C'est loin d'attirer les attentions des candidats.
JN0-343 Démo gratuit à télécharger: http://www.pass4test.fr/JN0-343.html
NO.1 In the following output, what does the asterisk indicate?
A. The interface is configured as a trunk.
B. The interface is configured for spanning-tree protocol.
C. The interface is active.
D. The interface is inactive.
Answer: C
Juniper JN0-343 examen JN0-343 examen JN0-343
NO.2 Which command correctly assigns AS 65432 as the local router's autonomous system?
A. set protocols bgp local-as 65432
B. set routing-options local-as 65432
C. set protocols bgp autonomous-system 65432
D. set routing-options autonomous-system 65432
Answer: D
certification Juniper JN0-343 examen JN0-343 JN0-343 JN0-343
NO.3 Configuring bpdu-timeout-action enables which protection mechanism?
A. root protection
B. BPDU protection
C. loop protection
D. RSTP protection
Answer: C
certification Juniper certification JN0-343 certification JN0-343
NO.4 Which of the following can be used for both security and loop prevention?
A. firewall filters
B. DHCP snooping
C. dynamic ARP inspection D. MAC move limiting
Answer: D
Juniper examen JN0-343 examen JN0-343 certification JN0-343 JN0-343
NO.5 Which OSPF area type can contain Type 7 LSAs?
A. backbone
B. not-so-stubby
C. stub
D. totally stubby
Answer: B
certification Juniper JN0-343 examen certification JN0-343 JN0-343 examen JN0-343 examen
NO.6 What is the correct sequence of OSPF adjacency formation?
A. Down, Init, ExStart, 2way, Loading, Exchange, Full
B. Down, 2way, Init, ExStart, Exchange, Loading, Full
C. Down, Init, 2way, ExStart, Exchange, Loading, Full
D. Down, Init, 2way, Loading, ExStart, Exchange, Full
Answer: C
Juniper examen JN0-343 JN0-343 JN0-343
NO.7 An administrator finds that traffic from a large file download over an HTTP session is not load-balanced
across multiple links in a LAG. What is the possible cause?
A. Per-packet load-balancing is not configured.
B. The redundant path has a different IGP metric.
C. The hash key is not configured in the forwarding-options stanza.
D. This is the expected behavior.
Answer: D
certification Juniper JN0-343 JN0-343 examen
NO.8 Which statement describes the default Junos OS behavior for OSPF?
A. External LSAs are advertised in a stub area.
B. An ABR does not announce a default route into a stub area.
C. Stub area internal routers generate a default route.
D. Only totally stubby areas need a default route.
Answer: B
Juniper JN0-343 examen JN0-343 certification JN0-343
NO.9 Which configuration summarizes external routes in the 172.16.0.0/22 range into a single prefix on an
ABR for Area 1?
A. protocols { ospf { area 0.0.0.1 {
nssa {
default-lsa {
default-metric 1;
metric-type 1;
}
}
area-range 172.16.0.0/22;
}
}
}
B. protocols {
ospf {
area 0.0.0.1 {
nssa {
area-range 172.16.0.0/22;
}
}
}
}
C. protocols {
ospf {
area 0.0.0.1 {
stub summaries;
}
}
}
D. protocols {
ospf {
area 0.0.0.1 {
nssa;
area-range 172.16.0.0/22 restrict;
}
}
}
Answer: B
certification Juniper certification JN0-343 JN0-343 JN0-343 examen JN0-343
NO.10 What is the minimum configuration necessary to create two VLANs and two operational RVIs?
A. Option A
B. Option B
C. Option C
D. Option D
Answer: B
Juniper examen JN0-343 certification JN0-343 JN0-343
NO.11 What is the default behavior of a trunk port when it receives transit traffic without a VLAN tag?
A. It drops the traffic.
B. It forwards the traffic.
C. It tags the transit traffic with lowest VLAN ID permitted on the trunk.
D. It tags the transit traffic with highest VLAN ID permitted on the trunk.
Answer: A
Juniper examen JN0-343 JN0-343 certification JN0-343 JN0-343
NO.12 Which two of the following are functions of the BGP update message? (Choose two.)
A. It withdraws routes that are no longer valid.
B. It notes that an unsupported option is detected from the open message.
C. It transports routing information between BGP peers.
D. It readvertises routes that have already been sent and acknowledged.
Answer: A,C
Juniper JN0-343 examen JN0-343 JN0-343 examen JN0-343 examen
NO.13 Which statements are true about graceful Routing Engines switchover (GRES)?
A. Configuration on both Routing Engines must be synchronized.
B. The backup Routing Engine cannot be managed through IP address because RPD does not run on
backup the Routing Engine.
C. Different hostnames must be configured on both Routing-Engines.
D. Both Routing-Engines are managed through a single out-of-band-management IP address.
Answer: A
Juniper JN0-343 certification JN0-343
NO.14 When processing inbound Ethernet frames, which firewall filter is evaluated first by an EX Series
switch?
A. port filter
B. VLAN filter
C. trunk filter
D. route filter
Answer: A
Juniper examen JN0-343 JN0-343 certification JN0-343 JN0-343
NO.15 What are two valid BPDU types? (Choose two.)
A. topology change notification
B. configuration change
C. configuration
D. root bridge
Answer: A,C
certification Juniper JN0-343 JN0-343 examen JN0-343 examen
NO.16 Which three statements correctly describe the default BGP advertisement behavior in the Junos OS?
(Choose three.)
A. Routes learned through EBGP are advertised to IBGP peers.
B. Routes learned through EBGP are advertised to other EBGP peers.
C. Routes learned through IBGP are advertised to other IBGP peers.
D. Routes learned through IBGP will be advertised to EBGP peers.
E. Routes learned through an IGP are automatically advertised to EBGP peers.
Answer: A,B,D
Juniper JN0-343 JN0-343
NO.17 Which protocol is an IGP?
A. LACP
B. STP
C. OSPF
D. PAGP
Answer: B
certification Juniper JN0-343 examen JN0-343 certification JN0-343 JN0-343 examen JN0-343 examen
NO.18 How much overhead does the GRE header add to an IPv4 packet?
A. 24 bytes
B. 32 bytes
C. 48 bytes
D. 64 bytes
Answer: A
certification Juniper certification JN0-343 JN0-343 JN0-343
NO.19 Which two OSPF LSA types can be used to advertise routes between areas? (Choose two.)
A. router
B. network
C. external
D. summary
Answer: C,D
certification Juniper JN0-343 certification JN0-343
NO.20 Which configuration disables a port when more than 30,000 Kbps of broadcast traffic is received over
an aggregated Ethernet interface with two member links?
A. Option A
B. Option B
C. Option C
D. Option D
Answer: C
Juniper JN0-343 examen JN0-343 certification JN0-343 JN0-343 examen
NO.21 Which OSPF LSA type is sent by all routers in an area to advertise its connected subnets?
A. router
B. network
C. external
D. summary
Answer: A
certification Juniper JN0-343 JN0-343
NO.22 When loop protection is enabled on an interface, what happens when the port stops receiving BPDUs?
A. The port is placed in a loop-inconsistent role.
B. The port is placed into listening mode.
C. The port is transitioned into a forwarding state.
D. The interface is disabled.
Answer: A
certification Juniper JN0-343 examen certification JN0-343 JN0-343
NO.23 Which two pieces of information are communicated by IS-IS TLVs? (Choose two.)
A. network protocols supported
B. designated router priority
C. authentication key
D. PDU Length
Answer: A,C
Juniper certification JN0-343 certification JN0-343 JN0-343 examen
NO.24 Which routing-instance type allows the sharing of interface routes and the support features used in
source-based routing?
A. virtual-router
B. vrf
C. forwarding
D. multi-instance
Answer: C
Juniper examen JN0-343 JN0-343 certification JN0-343
NO.25 Which configuration correctly sets interface ge-0/0/4 in trunk mode, carrying VLANs v10 and v20?
A. ge-0/0/4 {
unit 0 {
family ethernet-switching {
vlan {
members [ v10 v20 ];
}
} } }
B. ge-0/0/4 {
unit 0 {
family ethernet-switching {
port-mode trunk;
vlan {
members [ v10 v20 ];
}
}
}
}
C. ge-0/0/4 {
vlan-tagging;
unit 0 {
family ethernet-switching {
port-mode trunk;
vlan {
members [ v10 v20 ];
}
}
}
}
D. ge-0/0/4 {
unit 10 {
family ethernet-switching;
}
unit 20 {
family ethernet-switching;
}
}
Answer: B
Juniper JN0-343 examen JN0-343
NO.26 Given the following output, what has been configured for the 192.168.3.0/24 prefix?
A. per-flow load balancing
B. a floating static route
C. per-packet load balancing
D. a qualified next hop
Answer: A
Juniper JN0-343 JN0-343 examen
NO.27 Click the Exhibit button.
Based on the exhibit, in which spanning-tree state would the indicated port be.?
A. listening
B. learning
C. forwarding
D. blocking
Answer: C
Juniper certification JN0-343 JN0-343 JN0-343 certification JN0-343
NO.28 Which of the following is enabled by default on an EX Series switch?
A. MAC move limiting
B. storm control
C. IP source guard
D. dynamic ARP inspection
Answer: B
Juniper JN0-343 certification JN0-343 JN0-343
NO.29 Which Junos command correctly configures the ge-0/0/0.0 interface to operate only for IS-IS Level 2?
A. set interfaces ge-0/0/0.0 family iso level 2 enable
B. set interfaces ge-0/0/0.0 family iso level 1 disable
C. set protocols isis interface ge-0/0/0.0 level 2 enable
D. set protocols isis interface ge-0/0/0.0 level 1 disable
Answer: D
certification Juniper JN0-343 JN0-343
NO.30 Which BGP attributes are listed in the correct route selection order?
A. local preference, AS path, origin, MED
B. local preference, MED, AS path, origin
C. AS path, local preference, origin, MED
D. MED, origin, local preference, AS path
Answer: A
certification Juniper JN0-343 JN0-343
Pass4Test vous permet à réussir le test Certification sans beaucoup d'argents et de temps dépensés. La Q&A Juniper JN0-343 est recherchée par Pass4Test selon les résumés de test réel auparavant, laquelle est bien liée avec le test réel.
没有评论:
发表评论