On peut voir que beaucoup de candidats ratent le test Extreme Networks EW0-100 quand même avec l'effort et beaucoup de temps dépensés. Cest une bonne preuve que le test Extreme Networks EW0-100 est difficile à réussir. Pass4Test offre le guide d'étude bien fiable. Sauf le test Extreme Networks EW0-100, Pass4Test peut offrir les Q&As des autres test Certification IT.
Dans n'importe quelle industrie, tout le monde espère une meilleure occasion de se promouvoir, surtout dans l'industrie de IT. Les professionnelles dans l'industrie IT ont envie d'une plus grande space de se développer. Le Certificat Extreme Networks EW0-100 peut réaliser ce rêve. Et Pass4Test peut vous aider à réussir le test Extreme Networks EW0-100.
Il y a plusieurs de façons pour réussir le test Extreme Networks EW0-100, vous pouvez travailler dur et dépenser beaucoup d'argents, ou vous pouvez travailler plus efficacement avec moins temps dépensés.
Code d'Examen: EW0-100
Nom d'Examen: Extreme Networks (Extreme Networks Associate (ENA) )
Questions et réponses: 241 Q&As
L'importance de la position de Certificat Extreme Networks EW0-100 dans l'industrie IT est bien claire pour tout le monde, mais c'est pas facile à obtenir ce Certificat. Il y a beaucoup de Q&As qui manquent une haute précision des réponses. Cependant, Pass4Test peut offrir des matériaux pratiques pour toutes les personnes à participer l'examen de Certification, et il peut aussi offrir à tout moment toutes les informations que vous auriez besoin à réussir l'examen Extreme Networks EW0-100 par votre première fois.
Maintenant, beaucoup de professionnels IT prennent un même point de vue que le test Extreme Networks EW0-100 est le tremplin à surmonter la pointe de l'Industrie IT. Beaucoup de professionnels IT mettent les yeux au test Certification Extreme Networks EW0-100.
EW0-100 Démo gratuit à télécharger: http://www.pass4test.fr/EW0-100.html
NO.1 Internal routers within an OSPF area are either DRs, BDRs, or __________.
Answer: ODR
certification Extreme Networks certification EW0-100 EW0-100 examen certification EW0-100
NO.2 Which command would you use to configure VLAN CORPORATE (tag 100) with
ports 1:1 through 4:8 tagged and ports 5:1 through 8:8 as untagged?
A. config vlan corporate ports add 1:1-4:8 tagged ¨¤ config vlan corporate ports add
5:1-8:8 untagged
B. config vlan corporate add ports1:1-4:8 tagged ¨¤ config vlan corporate add ports
5:1-8:8 untagged
C. config corporate vlan add ports 1:1-4-8 tagged ¨¤ config corporate vlan add ports
5:1-8:8 untagged
D. config corporate vlan ports add 1:1-4:8 tagged ¨¤ config corporate vlan ports add
5:1:8:8 untagged
Answer: B
Extreme Networks EW0-100 EW0-100 examen EW0-100 certification EW0-100
NO.3 VLAN aggregation allows multiple sub-VLANs to share a single IP subnet.
A. True
B. False
Answer: A
Extreme Networks EW0-100 EW0-100 examen certification EW0-100 EW0-100 EW0-100
NO.4 How do you disable Split Horizon?
A. disable rip splithorizon noadvertise
B. unconfig rip splithorizon
C. disable rip splithorizon
D. unconfig rip splithorizon noadvertise
Answer: C
certification Extreme Networks EW0-100 examen EW0-100 EW0-100
NO.5 Exhibit:
Given this display, how would you find information similar to the SHOW SWITCH
command?
A. Click on STATISTICS, then SHOW, then SWITCH.
B. Click on STATISTICS, then SWITCH, then SHOW.
C. Click on STATISTICS, then SHOW.
D. Click on STATISTICS, then SWITCH.
Answer: D
Extreme Networks EW0-100 examen certification EW0-100 certification EW0-100 EW0-100
NO.6 What is the minimum ExtremeWare software version that supports the Summit48i?
A. ExtremeWare 4.x
B. ExtremeWare 5.x
C. ExtremeWare 6.x
D. None of the above
Answer: C
certification Extreme Networks certification EW0-100 EW0-100 EW0-100
NO.7 A VLAN can be a member of up to 64 STPDs.
A. True
B. False
Answer: B
Extreme Networks examen EW0-100 examen EW0-100 examen certification EW0-100
NO.8 Which ExtremeWare feature permits ESRP to increase the number of protected
VLANs by placing them under the control of a master VLAN?
A. ESRP groups
B. ESRP domains
C. ESRP host attach
D. None of these.
Answer: B
Extreme Networks examen EW0-100 EW0-100 EW0-100
NO.9 Unlike VRRP, the Extreme Standby Router Protocol provides redundancy at both
the data link and network layers.
A. True
B. False
Answer: A
certification Extreme Networks EW0-100 certification EW0-100 EW0-100 EW0-100
NO.10 What is the default value for the RIP garbagetime setting?
A. 30 seconds
B. 60 seconds
C. 120 seconds
D. 180 seconds
Answer: C
Extreme Networks EW0-100 examen certification EW0-100 EW0-100
NO.11 Which RIP settings are enabled by default?
A. Triggered updates
B. Poison Reverse
C. Split Horizon
D. Route redistribution
Answer: ABC
Extreme Networks examen EW0-100 EW0-100 certification EW0-100
NO.12 QoS policy is applied _____ in an Extreme switch.
A. per port
B. per queue, per port
C. per queue
D. None of these.
Answer: B
Extreme Networks EW0-100 certification EW0-100 EW0-100
NO.13 Without QoS, all packets are allowed equal access to an egress port.
A. True
B. False
Answer: A
certification Extreme Networks certification EW0-100 EW0-100
NO.14 Which of the following is not advertised in an OSPF Link State Advertisement?
A. Costs
B. Link utilization
C. Router interfaces
D. Neighbor information
Answer: B
Extreme Networks EW0-100 EW0-100
NO.15 What is the default STP forward delay value?
A. 2 seconds
B. 10 seconds
C. 15 seconds
D. 20 seconds
Answer: C
Extreme Networks EW0-100 EW0-100
NO.16 What type of area is used to limit external routes?
A. Stub area
B. Normal area
C. Backbone area
D. None of these
Answer: A
certification Extreme Networks certification EW0-100 certification EW0-100 EW0-100 examen
NO.17 In RIP, poison reverse means that:
A. A route is not advertised to the interface from which it was learned.
B. A route is advertised as unreachable to the interface from which it was learned.
C. Traffic whose source interface does not match the routing table is blackholed.
D. None of these.
Answer: B
Extreme Networks EW0-100 EW0-100 certification EW0-100 EW0-100 EW0-100 examen
NO.18 __________ allow(s) multiple VLANs to be controlled by a single ESRP instance.
A. ESRP domains
B. ESRP groups
C. ESRP host-attach
D. None of these.
Answer: A
Extreme Networks certification EW0-100 certification EW0-100 EW0-100
NO.19 All OSPF routers in the same area must have the same LSDB.
A. True
B. False
Answer: A
Extreme Networks certification EW0-100 EW0-100 examen certification EW0-100 EW0-100 EW0-100
NO.20 When using Spanning Tree Protocol, ExtremeWare permits VLANs in different
STPDs to share the same port when tagged.
A. True
B. False
Answer: B
Extreme Networks examen EW0-100 certification EW0-100
NO.21 SNMP access to ExtremeWare can be limited by the following methods:
A. Use an access list
B. Use an access profile
C. Use the disable snmp access command
D. None of these
Answer: ABC
certification Extreme Networks certification EW0-100 certification EW0-100
NO.22 How would you change the password for John Doe's management account?
A. Enter config jdoe and then enter the new password twice.
B. Enter config jdoe user account and then enter the new password twice.
C. Enter config user account jdoe and then enter the new password twice.
D. Enter config account jdoe and then enter the new password twice.
Answer: D
certification Extreme Networks EW0-100 examen EW0-100
NO.23 Given router interfaces 10.0.0.1/24, 10.10.10.10/24, 192.168.0.1/24, and
192.168.255.254/24 on a Summit7i switch what will be the OSPF router ID given the
following command: config ospf routerid automatic?
A. 10.0.0.1/24
B. 10.10.10.10/24
C. 192.168.0.1/24
D. 192.168.255.254/24
Answer: D
Extreme Networks EW0-100 examen EW0-100 EW0-100 EW0-100 certification EW0-100
NO.24 STPDs s0, s1, and s2 have been created. How would you activate only s1 while
leaving the other STPDs inactive?
A. enable stpd s1
B. enable s1 stpd
C. enable stp ¨¤ enable s1 stpd
D. None of these
Answer: A
Extreme Networks examen certification EW0-100 EW0-100 examen
NO.25 Which command would you use to configure VLAN corporate with IP address
192.168.0.1/16?
A. config vlan corporate ipaddress 192.168.0.1/16
B. config ipaddress corporate vlan 192.168.0.1/16
C. config ipaddress 192.168.0.1/16 vlan corporate
D. config ipaddress 192.168.0.1/16 corporate vlan
Answer: A
Extreme Networks EW0-100 EW0-100 EW0-100
NO.26 Which of the following routes will be used to forward a frame to 192.168.1.174?
A. 192.168.1.0/29
B. 192.168.1.128/30
C. 192.168.1.128/25
D. None of these.
Answer: C
Extreme Networks examen EW0-100 EW0-100 certification EW0-100 certification EW0-100
NO.27 RIP version 2 uses a composite metric that includes link speed and delay.
A. True
B. False
Answer: B
Extreme Networks certification EW0-100 EW0-100 EW0-100 examen EW0-100 examen certification EW0-100
NO.28 If a packet to be forwarded does not match existing flow information in the ASIC
route cache, the packet is queued to the __________ for route processing.
Answer: cpu
Extreme Networks examen EW0-100 EW0-100 examen EW0-100
NO.29 Extreme Networks "I" series switches have this many queues per port. __________.
Answer: 8
NO.30 Name a relative route priority that cannot be altered? __________.
Answer: direct
certification Extreme Networks certification EW0-100 EW0-100 EW0-100 certification EW0-100 EW0-100
Pass4Test est un bon site qui provide la façon efficace à se former à court terme pour réussir le test Extreme Networks EW0-100, c'est un certificat qui peut améliorer le niveau de vie. Les gens avec le Certificat gagent beaucoup plus que les gens sans Certificat Extreme Networks EW0-100. Vous aurez une space plus grande à se développer.
没有评论:
发表评论