Il y a beaucoup de gans ambitieux dansn l'Industrie IT. Pour monter à une autre hauteur dans la carrière, et être plus proche du pic de l'Industrie IT. On peut choisir le test Symantec ST0-250 à se preuver. Mais le taux du succès et bien bas. Participer le test Symantec ST0-250 est un choix intelligent. Dans l'Industrie IT de plus en plus intense, on doit trouver une façon à s'améliorer. Vous pouvez chercher plusieurs façons à vous aider pour réussir le test.
Votre vie changera beaucoup après d'obtenir le Certificat de Symantec ST0-250. Tout va améliorer, la vie, le boulot, etc. Après tout, Symantec ST0-250 est un test très important dans la série de test Certification Symantec. Mais c'est pas facile à réussir le test Symantec ST0-250.
Pass4Test est un site de provider les chances à se former avant le test Certification IT. Il y a de différentes formations ciblées aux tous candidats. C'est plus facile à passer le test avec la formation de Pass4Test. Parmi les qui ont déjà réussi le test, la majorité a fait la préparation avec la Q&A de Pass4Test. Donc c'est pourquoi, Pass4Test a une bonne réputation dansn l'Industrie IT.
Code d'Examen: ST0-250
Nom d'Examen: Symantec (Symantec Messaging Gateway 10.5 Technical Assessment)
Questions et réponses: 126 Q&As
Vous allez choisir Pass4Test après essayer une partie de Q&A Symantec ST0-250 (gratuit à télécharger). Le guide d'étude produit par Pass4Test est une assurance 100% à vous aider à réussir le test Certification Symantec ST0-250.
Pass4Test peut vous fournir un raccourci à passer le test Symantec ST0-250: moins de temps et efforts dépensés. Vous trouverez les bonnes documentations de se former dans le site Pass4Test qui peut vous aider efficacement à réussir le test Symantec ST0-250. Si vous voyez les documentations dans les autres sites, c'est pas difficile à trouver qu''elles sont venues de Pass4Test, parce que lesquelles dans Pass4Test sont le plus complété et la mise à jour plus vite.
ST0-250 Démo gratuit à télécharger: http://www.pass4test.fr/ST0-250.html
NO.1 How does Symantec DLP communicate with Symantec Messaging Gateway (SMG) to indicate
what type of incident (if any) is related to a given message?
A. Symantec DLP uses the ICAP protocol to indicate if a message is clean,or if it violated any defined
policies.
B. Symantec DLP will add information into the message that can be interpreted by SMG and then
send it to SMG via SMTP .
C. Symantec DLP will quarantine messages that violate established policies,blocking it from SMG.
D. Symantec DLP will use TLS to send a notification message to the SMG server for any content
violations.
Answer: B
Symantec examen certification ST0-250 certification ST0-250 certification ST0-250 certification ST0-250
NO.2 What should an administrator do before performing a software update of Symantec
Messaging Gateway 10.5?
A. Store backup on local server
B. Store backup on a remote location using FTP
C. Encrypt local backup
D. Purge all backups from the appliance
Answer: C
Symantec examen ST0-250 examen certification ST0-250 certification ST0-250
NO.3 An administrator needs to determine whether a sending MTA is being throttled by Symantec
Messaging Gateway 10.5. Where is this information located?
A. Reputation Summary report
B. IP reputation lookup table
C. SMTP server logs
D. message audit logs
Answer: B
Symantec certification ST0-250 ST0-250 examen certification ST0-250
6. After a configurable period of time, a suspect virus is released from the Suspect Virus
Quarantine. What happens to it next?
A. An alert is sent to the email administrator.
B. The attachment is removed and the original message is delivered to the recipient.
C. It is rescanned.
D. It is moved to quarantine.
Answer: C
Symantec examen ST0-250 examen ST0-250
7. What is the current name of the LDAP synchronization technology used within the Symantec
Messaging Gateway?
A. Dynamic Data Cache
B. Directory Data Service
C. Active Directory
D. Domain Controller Interface (DCInterface)
Answer: B
Symantec certification ST0-250 ST0-250 examen ST0-250 examen
8. If recipient validation is configured properly, which SMTP response level is given to messages
that fail recipient validation queries at connect time?
A. 3xx - Service unavailable
B. 4xx - Temporary delivery failure
C. 5xx - Permanent delivery failure
D. 6xx - Rejected validation failure
Answer: C
Symantec examen certification ST0-250 ST0-250 ST0-250 ST0-250 examen
9. How should an administrator stop inbound mail using the command line interface (CLI)?
A. use mta-control
B. use mta-stop
C. use mail-control
D. use mail-stop
Answer: A
Symantec examen ST0-250 examen certification ST0-250 ST0-250 examen
10. Which additional Email Reports Data collection must be enabled to track Top Probe Accounts
via reports?
A. Spam and Unwanted Mail
B. Submissions
C. Sender IP connections
D. Invalid Recipients
Answer: D
Symantec examen certification ST0-250 certification ST0-250 certification ST0-250 certification ST0-250
11. Which two statistics can the administrator view regarding the custom anti-spam rulesets?
(Select two.)
A. the "top-submitters" of missed spam or false positive detections
B. the "top submitters" of messages that are not valid and did not generate a custom rule
C. how many emails have been submitted for custom antispam rules
D. the effectiveness of the custom antispam rulesets compared to Symantec's rulesets
E. the top senders of messages detected by custon antispam rulesets
Answer: A,C
certification Symantec ST0-250 examen ST0-250 certification ST0-250 certification ST0-250
12. What two actions can allowed end-users do to submit samples to Symantec and have custom
anti-spam rules created? (Select two.)
A. submit a sample to Symantec using the Email Submission Client
B. flag messages in their web-based SMG quarantine page as being spam and submitting the results
C. forward spam samples to abuse@symantec.com with a subject of "MISSED SPAM"
D. move the message into the included "Junk E-mail" folder available in Outlook
E. submit a sample to Symantec using the Email Submission Client available for Lotus Domino
Answer: A,B
Symantec examen ST0-250 examen ST0-250 examen
13. A company uses multiple control centers. What must be done to ensure legitimate NDRs are
recognized by Bounce Attack Prevention across all scanners?
A. configure the same seed value on each control center
B. configure the same administrator email address across both control centers
C. configure the same seed value on each scanner
D. configure both control centers with the same internal email hosts
Answer: A
Symantec examen ST0-250 examen ST0-250 examen
14. An organization would like to participate in the Symantec Probe Network without having to
manually create decoy email accounts. The organization wants to make sure that the addresses that
participate in the Symantec Probe Network are currently receiving email. Which directory data
source function should be enabled to help in this situation?
A. recipient validation
B. address resolution
C. SMTP authentication
D. LDAP routing
Answer: A
Symantec examen ST0-250 examen certification ST0-250
15. What is required before attempting installation of the Symantec Messaging Gateway 10.5
appliance?
A. console access to the appliance
B. DVD-ROM drive listed on hardware compatibility list
C. valid license file
D. machine account created in Active Directory
Answer: A
certification Symantec certification ST0-250 certification ST0-250 ST0-250 examen ST0-250 examen ST0-250
NO.4 Symantec Messaging Gateway 10.5 will be deployed to receive mail directly from the Internet.
In this situation, which option should be selected within the Inbound Mail Filtering - Accepted Hosts
step of the site setup wizard?
A. Enable MX lookup
B. Define a list of domains
C. Specify IP addresses/domains
D. Select all IP addresses
Answer: D
Symantec ST0-250 certification ST0-250 certification ST0-250 ST0-250
NO.5 Which directory data source function must be enabled to help prevent a directory harvest
attack?
A. Active Directory connector
B. Dynamic Data Sourcing
C. LDAP authentication
D. Recipient validation
Answer: D
Symantec examen ST0-250 examen certification ST0-250 certification ST0-250 ST0-250
没有评论:
发表评论