Pass4Test est un site web de vous offrir particulièrement les infos plus chaudes à propos de test Certification Symantec ST0-174. Pour vous assurer à nous choisir, vous pouvez télécharger les Q&As partielles gratuites. Pass4Test vous promet un succès 100% du test Symantec ST0-174.
La Q&A lancée par Pass4Test est bien poupulaire. Pass4Test peut non seulement vous permettre à appendre les connaissances professionnelles, et aussi les expériences importantes résumées par les spécialistes dans l'Industrie IT. Pass4Test est un bon fournisseur qui peut répondre une grande demande des candidats. Avec l'aide de Pass4Test, vous aurez la confiance pour réussir le test. Vous n'aurez pas aucune raison à refuser le Pass4Test.
Pass4Test est un site de provider les chances à se former avant le test Certification IT. Il y a de différentes formations ciblées aux tous candidats. C'est plus facile à passer le test avec la formation de Pass4Test. Parmi les qui ont déjà réussi le test, la majorité a fait la préparation avec la Q&A de Pass4Test. Donc c'est pourquoi, Pass4Test a une bonne réputation dansn l'Industrie IT.
Code d'Examen: ST0-174
Nom d'Examen: Symantec (Symantec Data Loss Prevention 11.5 Technical Assessment )
Questions et réponses: 161 Q&As
Dans cette époque glorieuse, l'industrie IT est devenue bien intense. C'est raisonnable que le test Symantec ST0-174 soit un des tests plus populaires. Il y a de plus en plus de gens qui veulent participer ce test, et la réussite de test Symantec ST0-174 est le rêve pour les professionnels ambitieux.
Obtenez la Q&A de test Symantec ST0-174 de Pass4Test plus tôt, vous pouvez réussir le test Certification Symantec ST0-174 plus tôt.
Avec l'aide du Pass4Test, vous allez passer le test de Certification Symantec ST0-174 plus facilement. Tout d'abord, vous pouvez choisir un outil de traîner de Symantec ST0-174, et télécharger les Q&A. Bien que il y en a beaucoup de Q&A pour les tests de Certification IT, les nôtres peuvent vous donner non seulement plus de chances à s'exercer avant le test réel, mais encore vous feront plus confiant à réussir le test. La haute précision des réponses, la grande couverture des documentations, la mise à jour constamment vous assurent à réussir votre test. Vous dépensez moins de temps à préparer le test, mais vous allez obtenir votre certificat plus tôt.
ST0-174 Démo gratuit à télécharger: http://www.pass4test.fr/ST0-174.html
NO.1 Which two should be used to collect log information from Enforce servers? (Select two.)
A. enable the VontuSNMP service and set the community strings accordingly
B. use the Log Collection and Configuration tool
C. navigate manually to the log directory of the Enforce server installation
D. .access the Enforce Log Viewer page athttps://<VONTU_SRV>/logs?view=true
E. use dbgmonitor from sysinternals to connect to the debug output of the service
Answer: B,C
certification Symantec ST0-174 ST0-174 examen ST0-174 examen ST0-174
NO.2 An approved Endpoint device has been configured and added as an exception to a policy that blocks
the transfer of sensitive data. Data transfers to these approved Endpoint devices are still being blocked.
What should the Data Loss Prevention administrator do to resolve this?
A. disable and enable the policy involved for the changes to take effect
B. edit the exception rule to ensure Match On is set to "Attachments"
C. verify that the proper device ID or class has been entered
D. assign the Endpoint device configuration to all the Endpoint servers
Answer: C
Symantec examen ST0-174 ST0-174 examen ST0-174 examen ST0-174
NO.3 What is one benefit of using FlexResponse for Network Discover?
A. Response rules trigger varying actions depending on which DLP Agent created the incident.
B. An email can be encrypted as it is being transmitted.
C. Displayed incident data can be redacted from the Data Loss Prevention interface automatically.
D. Customizable incident remediation actions can be manually executed.
Answer: D
Symantec ST0-174 examen ST0-174 examen ST0-174 ST0-174
NO.4 What are two possible ways to provide incident match text information? (Select two.)
A. CSV export
B. Email notification
C. Reporting API
D. Syslog notification
E. XML export
Answer: C,E
Symantec examen ST0-174 ST0-174 ST0-174 examen certification ST0-174
NO.5 In which two ways can the default listener port for a detection server be modified? (Select two.)
A. through the Enforce user interface under System > Overview
B. by editing the Communication.properties file on a detection server
C. through the Enforce user interface under Manage > Policies
D. by editing the MonitorController.properties file on a detection server
E. by editing the jaas.config file on a detection server
Answer: A,B
certification Symantec ST0-174 examen ST0-174 examen
NO.6 A scanner fails to return results upon completion of the scan process. Which file should be removed to
eliminate previous scan issues?
A. scanner_typeScanner.cfg
B. Clean.exe
C. ScannerControllerLogging.properties
D. logs
Answer: A
Symantec certification ST0-174 ST0-174 examen
NO.7 A Network Monitor server has been installed and the networking components configured accordingly.
The server is receiving traffic, but fails to detect incidents. Running Wireshark indicates that the desired
traffic is reaching the detection server. What is the most likely cause for this behavior?
A. The mirrored port is sending corrupted packets.
B. The wrong interface is selected in the configuration.
C. The configuration is set to process GET requests.
D. The communication to the database server is interrupted.
Answer: D
Symantec examen ST0-174 ST0-174 ST0-174 ST0-174
NO.8 Which product must run on a physical server?
A. Endpoint Prevent
B. Network Monitor
C. Enforce D. Network Prevent
Answer: B
certification Symantec ST0-174 certification ST0-174 ST0-174 ST0-174
NO.9 Which is the correct traffic flow for the Symantec Data Loss Prevention for Tablets solution?
A. iPad > VPN > Tablet Server > Exchange Server > final destination
B. iPad > VPN > Web proxy > Tablet Server > final destination
C. iPad > VPN > Web proxy > Tablet Server > Enforce Server > final destination
D. iPad > VPN > Tablet Server > Web proxy > final destination
Answer: B
certification Symantec ST0-174 ST0-174 examen ST0-174 examen certification ST0-174
NO.10 Which detection server requires two physical network interface cards?
A. Network Protect
B. Network Discover
C. Endpoint Discover
D. Network Monitor
Answer: B
Symantec ST0-174 examen ST0-174 ST0-174
NO.11 Which two components are required for the Symantec Data Loss Prevention for Tablets solution in
addition to the Tablet Prevent and Enforce servers? (Select two.)
A. DLP Agent
B. Virtual Private Network Gateway
C. Web Proxy
D. 2010 Exchange Server
E. Mobile Device Management
Answer: B,C
Symantec examen ST0-174 examen ST0-174 ST0-174
NO.12 Which product can replace a confidential document residing on a share with a marker file explaining
why the document was removed?
A. Network Discover
B. Network Protect
C. Endpoint Prevent
D. Endpoint Discover
Answer: B
certification Symantec ST0-174 ST0-174 ST0-174 ST0-174 examen
NO.13 Which option describes the three-tier installation type for Symantec Data Loss Prevention?
A. Install the database, the Enforce Server, and a detection server all on the same computer.
B. Install the Oracle database and the Enforce Server on the same computer, then install detection
servers on separate computers.
C. Install the Oracle Client (SQL*Plus and Database Utilities) on three detection servers.
D. Install the Oracle database, the Enforce Server, and a detection server on separate computers.
Answer: C
Symantec ST0-174 ST0-174 ST0-174 examen ST0-174 ST0-174
NO.14 Which profile contains information to enable the VPN on Demand functionality for the Data Loss
Prevention for Tablets solution.?
A. DLP Agent profile
B. SCEP profile
C. iOS profile
D. VPN client profile
Answer: C
certification Symantec ST0-174 certification ST0-174 certification ST0-174
NO.15 How can an administrator validate that once a policy is updated and saved it has been enabled on a
specific detection server?
A. check the status of the policy on the policy list page
B. check to see whether the policy was loaded under System > Servers > Alerts
C. check the policy and validate the date and time it was last updated
D. check to see whether the policy was loaded under System > Servers > Events
Answer: D
Symantec examen ST0-174 ST0-174
NO.16 An administrator has completed the example document training process, but is having difficulty deciding
whether or not to accept a VML profile. Where can the administrator find information regarding the quality
of each training set at a granular, per-fold level?
A. machinelearning_training_process.log file
B. machinelearning_native_filereader.log file
C. machinelearning_training.log file
D. machinelearning_native_manager.log file
Answer: C
Symantec examen ST0-174 ST0-174 examen ST0-174 ST0-174
NO.17 What are two benefits of the Symantec Data Loss Prevention 11.5 security architecture? (Select two.)
A. Communication is initiated by the detection servers inside the firewall.
B. SSL communication is used for user access to the Enforce Platform.
C. Endpoint Agent to Endpoint Server communication uses the Triple Data Encryption Standard (Triple
DES).
D. Confidential information captured by system components is stored using Advanced Encryption
Standards (AES) symmetric keys.
E. All indexed data uploaded into the Enforce Platform is protected with a two-way hash.
Answer: B,D
Symantec examen certification ST0-174 ST0-174 ST0-174 examen ST0-174 examen
NO.18 What is a possible solution when a Network Discover server is unable to scan a remote file server?
A. mount the IPC$ share on the file server
B. verify that the target file server is a Windows 2000 server
C. use the fully qualified name (FQDN) of the server
D. verify that the file server has .NET services running
Answer: C
Symantec examen ST0-174 examen ST0-174 examen ST0-174
NO.19 A user attempts to run Lookup Attributes manually on an incident. On the Incident List page under
Incident Actions, the option for Lookup Attributes is missing. Which section in the Plugins.properties file is
misconfigured?
A. Plugin Execution Chain is undefined.
B. Attribute Lookup parameters is set to "message".
C. Automatic plugin reload is set to false.
D. Automatic Lookup is set to false.
Answer: A
certification Symantec ST0-174 examen certification ST0-174
NO.20 What is the function of the Remote Indexer?
A. to create Index Document Matching (IDM) profiles and Exact Data Matching (EDM) profiles on a
remote server
B. to create Exact Data Matching (EDM) profiles on a remote server
C. to create policy templates on a remote server
D. to create Index Document Matching (IDM) profiles on a remote server
Answer: B
Symantec ST0-174 certification ST0-174 ST0-174 ST0-174 examen ST0-174 examen
Le produit de Pass4Test que vous choisissez vous met le pied sur la première marche du pic de l'Industrie IT, et vous serez plus proche de votre rêve. Les matériaux offerts par Pass4Test peut non seulement vous aider à réussir le test Symantec ST0-174, mais encore vous aider à se renforcer les connaissances professionnelles. Le service de la mise à jour pendant un an est aussi gratuit pour vous.
没有评论:
发表评论