La Q&A de Pass4Test vise au test Certificat Network Appliance NS0-163. L'outil de formation Network Appliance NS0-163 offert par Pass4Test comprend les exercices de pratique et le test simulation. Vous pouvez trouver les autres sites de provider la Q&A, en fait vous allez découvrir que c'est l'outil de formation de Pass4Test qui offre les documentaions plus compètes et avec une meilleure qualité.
Vous Network Appliance NS0-163 pouvez télécharger le démo Network Appliance NS0-163 gratuit dans le site Pass4Test pour essayer notre qualité. Une fois vous achetez le produit de Pass4Test, nous allons faire tous effort à vous aider à réussir le test à la première fois et vous laisser savoir qu'il ne faut pas beaucoup de travaux pour réussir ce que vous voulez.
Code d'Examen: NS0-163
Nom d'Examen: Network Appliance (Network Appliance Data Protection Solutions)
Questions et réponses: 154 Q&As
Les spécialistes d'expérience de Pass4Test ont fait une formation ciblée au test Network Appliance NS0-163. Cet outil de formation est convenable pour les candidats de test Network Appliance NS0-163. Pass4Test n'offre que les produits de qualité. Vous aurez une meilleure préparation à passer le test avec l'aide de Pass4Test.
Dans n'importe quelle industrie, tout le monde espère une meilleure occasion de se promouvoir, surtout dans l'industrie de IT. Les professionnelles dans l'industrie IT ont envie d'une plus grande space de se développer. Le Certificat Network Appliance NS0-163 peut réaliser ce rêve. Et Pass4Test peut vous aider à réussir le test Network Appliance NS0-163.
Le temps est tellement précieux dans cette société que une bonn façon de se former avant le test Network Appliance NS0-163 est très important. Pass4Test fait tous efforts à assurer tous les candidats à réussir le test. Aussi, un an de mise à jour est gratuite pour vous. Si vous ne passez pas le test, votre argent sera tout rendu.
Pass4Test est un fournisseur professionnel des documentations à propos du test Certification IT, avec lequel vous pouvez améliorer le future de votre carrière. Vous trouverez que nos Q&As seraient persuadantes d'après d'avoir essayer nos démos gratuits. Le démo de Network Appliance NS0-163 (même que les autres démos) est gratuit à télécharger. Vous n'aurez pas aucune hésitation après travailler avec notre démo.
NS0-163 Démo gratuit à télécharger: http://www.pass4test.fr/NS0-163.html
NO.1 Which statement applies to the Open Systems SnapVault Free Space Estimator utility?
A. This utility run automatically after each transfer.
B. This utility must be enabled on the secondary storage system.
C. This utility determines if there is sufficient disk space available on the primary to perform an OSSV
transfer.
D. This utility determines if there is sufficient disk space available on the secondary to perform an OSSV
transfer.
Answer: C
Network Appliance examen NS0-163 examen certification NS0-163 NS0-163
NO.2 Which is true of the SnapVault backup of NetApp storage system?
A. The file is the basic unit for SnapVault backup destination.
B. The qtree is the basic unit for SnapVault backup destination.
C. The volume is the basic unit of SnapVault backup destination.
D. The directory is the basic unit for SnapVault backup destination.
Answer: B
Network Appliance examen NS0-163 certification NS0-163
NO.3 Before enabling an active/active configuration, you should verify and compare the configuration of the
nodes. Which tool can perform this task?
A. cf-config-check.cgi script
B. cf status command on both nodes
C. clustercheck script
D. Release Comparison Tool
Answer: A
certification Network Appliance NS0-163 certification NS0-163
NO.4 Which Data ONTAP option sets system-wide throttling for all transfers?
A. options transfer.wide.enable
B. options transfer.throttle.enable
C. options replication.wide.enable
D. options replication.throttle.enable
Answer: D
Network Appliance NS0-163 NS0-163
NO.5 Data ONTAP uses inodes in an active file system to reference ___________.
A. qtrees
B. disk blocks
C. file segments
D. Snapshot copies
Answer: B
Network Appliance NS0-163 NS0-163 examen
NO.6 Which option will allow a storage system to SnapMirror from this source system?
A. snapmirror.access <destination_filer>
B. snapmirror.destination <destination_filer>
C. options snapmirror.allow host = <destination_filer>
D. options snapmirror.access host = <destination_filer>
Answer: D
Network Appliance NS0-163 NS0-163 NS0-163 NS0-163
NO.7 What is the correct format for the scheduling component of a SnapVault schedule?
A. YYYY-MM-DD
B. crontab format
C. cnt[@day_list][@hour_list]
D. List of dates in ISO Date format
Answer: C
Network Appliance NS0-163 examen NS0-163 NS0-163 examen
NO.8 Which three /etc/snapmirror.conf entries will support synchronous or semi-synchronous SnapMirror?
(Choose three.)
A. FilerA:source_vol FilerB:destination_vol - sync
B. FilerA:source_vol FilerB:destination_vol - 0-55/5 * * *
C. FilerA:source_vol FilerB:destination_vol outstanding=3s sync
D. FilerA:source_vol FilerB:destination_vol visibility_interval=1hr, outstanding=3ms, cksum=crc32 sync
Answer: ACD
Network Appliance examen NS0-163 NS0-163 NS0-163
NO.9 Which command creates a new SyncMirror aggregate, letting Data ONTAP select the disk drives?
A. aggr create aggrX -d 12
B. aggr create aggrX -m 12
C. aggr mirror aggrX -m 12
D. aggr mirror aggrX -n 12
Answer: B
Network Appliance examen NS0-163 NS0-163 examen NS0-163 certification NS0-163 NS0-163
NO.10 The SnapVault secondary system allows you to keep a separate schedule of Snapshot copies from
your primary system.
A. True
B. False
Answer: A
Network Appliance examen certification NS0-163 NS0-163
NO.11 Assume fabric-attached MetroCluster using hardware disk ownership. If the local node has its FC HBA
connected to switch bank 1, it owns the disks connected to switch bank ___.
A. 1
B. 2
C. 3
D. 4
Answer: B
certification Network Appliance NS0-163 NS0-163 certification NS0-163
NO.12 A NearStore license increases the amount of concurrent replication streams.
A. True
B. False
Answer: A
certification Network Appliance NS0-163 NS0-163 examen NS0-163
NO.13 Which OSSV tool would you use to perform an OSSV unattended installation?
A. msipackage
B. svunattendossv
C. svconfigpackager
D. unattendpackager
Answer: C
Network Appliance examen NS0-163 certification NS0-163 NS0-163 NS0-163 examen
NO.14 The snapvault snap sched -x command is used to ____________.
A. schedule full backups
B. cancel scheduled backups
C. schedule baseline transfer
D. schedule incremental backups
Answer: D
Network Appliance examen NS0-163 NS0-163 examen
NO.15 Which two choices are used to configure a semi-synchronous SnapMirror relationship? (Choose two.)
A. throttle
B. visibility interval
C. outstanding=3s in DOT 7.2
D. using option semi-sync in DOT 7.3 and higher
Answer: CD
Network Appliance certification NS0-163 certification NS0-163 NS0-163
NO.16 The ONTAP SnapVault primary license on the target storage system is required for Open System
SnapVault.
A. True
B. False
Answer: B
certification Network Appliance NS0-163 NS0-163 certification NS0-163
NO.17 A snapshot is a frozen, read-only image of the entire Data ONTAP active file system that reflects the
state of the ____________ at the time the snapshot was created.
A. qtrees
B. volume
C. directory
D. storage system
Answer: B
Network Appliance NS0-163 certification NS0-163
NO.18 Which command or procedure would you use to undo a volume SnapRestore operation?
A. snap restore -r <vol/snapshotname> vol <path_and_vol_name>
B. snap revert -s <vol/snapshotname> vol <path_and_vol_name>
C. snap restore undo vol <path_and_vol_name>
D. You cannot undo a SnapRestore operation at the volume level.
Answer: D
Network Appliance examen NS0-163 certification NS0-163 NS0-163 NS0-163 examen
NO.19 Which system is recommended as a secondary system for SnapVault?
A. IS1200
B. DataFort
C. NearStore VTL
D. FAS with NearStore license
Answer: D
certification Network Appliance NS0-163 NS0-163 NS0-163
NO.20 Which action will cause a currently in-sync SnapMirror relationship to fall out of sync?
A. Running snapmirror update on the source storage system
B. Running snapmirror release on the source storage system
C. Modifying the /etc/snapmirror.conf file for the relationship on the source storage system
D. Modifying the /etc/snapmirror.conf file for the relationship on the destination storage system
Answer: D
Network Appliance examen NS0-163 examen NS0-163 NS0-163 examen
La solution offerte par Pass4Test comprenant un test simulation bien proche de test réel Network Appliance NS0-163 peut vous assurer à réussir 100% le test Network Appliance NS0-163. D'ailleur, le service de la mise à jour gratuite est aussi pour vous. Maintenant, vous pouvez télécharger le démo gratuit pour prendre un essai.
没有评论:
发表评论