Le matériel de formation de l'examen de meilleur Network Appliance NS0-102

Pass4Test est un seul site de provider le guide d'étude Network Appliance NS0-102 de qualité. Peut-être que vous voyiez aussi les Q&A Network Appliance NS0-102 dans autres sites, mais vous allez découvrir laquelle est plus complète. En fait, Pass4Test est aussi une resource de Q&A pour les autres site web.

Le test Network Appliance NS0-102 est très important dans l'Industrie IT, tous les professionnels le connaîssent ce fait. D'ailleur, c'est difficile à réussir ce test, toutefois le test Network Appliance NS0-102 est une bonne façon à examiner les connaissances professionnelles. Un gens avec le Certificat Network Appliance NS0-102 sera apprécié par beaucoup d'entreprises. Pass4Test est un fournisseur très important parce que beaucoup de candidats qui ont déjà réussi le test preuvent que le produit de Pass4Test est effectif. Vous pouvez réussir 100% le test Network Appliance NS0-102 avec l'aide de Pass4Test.

Bien qu'Il y ait plein de talentueux dans cette société, il manque beaucoup de professionnels dans les domaine en cours de développement, l'Industrie IT est l'un de ces domaines. Donc le test Network Appliance NS0-102 est un bon l'examination de technique informatique. Pass4Test est un site d'offrir la formation particulière au test Network Appliance NS0-102.

Code d'Examen: NS0-102

Nom d'Examen: Network Appliance (NetApp(ASAP) Accredited Storage Architect Professional)

Questions et réponses: 176 Q&As

Les experts de Pass4Test profitent de leurs expériences et connaissances à augmenter successivement la qualité des docmentations pour répondre une grande demande des candidats, juste pour que les candidats soient permis à réussir le test Network Appliance NS0-102 par une seule fois. Vous allez avoir les infos plus proches de test réel à travers d'acheter le produti de Pass4Test. Notre confiance sont venue de la grande couverture et la haute précision de nos Q&As. 100% précision des réponses vous donnent une confiance 100%. Vous n'auriez pas aucun soucis avant de participer le test.

Il y a beaucoup de gans ambitieux dansn l'Industrie IT. Pour monter à une autre hauteur dans la carrière, et être plus proche du pic de l'Industrie IT. On peut choisir le test Network Appliance NS0-102 à se preuver. Mais le taux du succès et bien bas. Participer le test Network Appliance NS0-102 est un choix intelligent. Dans l'Industrie IT de plus en plus intense, on doit trouver une façon à s'améliorer. Vous pouvez chercher plusieurs façons à vous aider pour réussir le test.

NS0-102 Démo gratuit à télécharger: http://www.pass4test.fr/NS0-102.html

NO.1 What is Tech OnTap from NetApp?
A. a weekly technical podcast
B. a monthly e-newsletter
C. a monthly Webcast by a NetApp specialist
D. an online knowledgebase for Data ONTAP
Answer: B

certification Network Appliance   NS0-102 examen   NS0-102 examen

NO.2 What is a vFiler?
A. a virtual instance of a NetApp Storage System created via MultiStore
B. a controller running Data ONTAP that can front-end third-party storage
C. a simulated version of Data ONTAP that runs on Linux
D. a NetApp Disk-to-Disk virtual tape solution
Answer: A

Network Appliance   NS0-102   certification NS0-102   NS0-102

NO.3 Which two benefits would a customer enjoy after implementing SnapManager for Oracle into their
Oracle Database environment? (Choose two.)
A. reduced recovery time objective
B. transparent database migration
C. reduced database copy time
D. reduced mirrored database footprint
Answer: AC

Network Appliance examen   NS0-102 examen   NS0-102 examen   certification NS0-102   NS0-102   NS0-102

NO.4 Which two products/functions from NetApp are NOT supported on the V-Series platform? (Choose
two.)
A. SnapLock Compliance
B. RAID-DP
C. FlexVol
D. SnapLock Enterprise
E. SnapMirror
Answer: AB

Network Appliance examen   NS0-102   certification NS0-102   NS0-102 examen   NS0-102

NO.5 Regulations call for semi-conductor manufacturers to maintain design data in reference form over
extended periods.
Which NetApp solution offers this capability?
A. SnapVault
B. Open System SnapVault
C. SnapLock
D. SnapMirror
Answer: C

Network Appliance   NS0-102 examen   NS0-102

NO.6 Which two statements are true about SnapRestore? (Choose two.)
A. After you use SnapRestore to revert to a selected Snapshot copy, you cannot undo the reversion.
B. After you use SnapRestore to recover a file, the restored file remains read-only.
C. SnapRestore allows for the recovery of a single file.
D. SnapRestore allows for the recovery of a qtree and its contents.
Answer: AC

Network Appliance   NS0-102 examen   certification NS0-102   NS0-102

NO.7 Which three statements about SnapDrive for Windows are true? (Choose three.)
A. It is the foundation for SnapManager for SQL.
B. It provides NTFS-consistent Snapshot copies.
C. It simplifies LUN management in a Windows environment.
D. It simplifies CIFS management in a Windows environment.
E. It requires Active Directory to function.
Answer: ABC

Network Appliance examen   certification NS0-102   NS0-102 examen   NS0-102   NS0-102 examen   NS0-102

NO.8 Within the NetApp Manageability Software Family, which products does the Application Suite contain?
A. Protection Manager, Virtual File Manager, SAN Manager
B. SnapDrive for Windows, SnapDrive for UNIX, ApplianceWatch
C. Operations Manager, File Storage Resource Manager, CommandCentral Storage
D. SnapManager for Oracle, SnapManager for SQL Server, SnapManager for Exchange
Answer: D

Network Appliance   NS0-102 examen   certification NS0-102

NO.9 Which two protocol groups are supported natively on NetApp storage? (Choose two.)
A. NAS protocols (CIFS, NFS)
B. SAN protocols (ISCSI, FCP)
C. streaming protocols (RTP, RTSP)
D. messaging protocols (imap4, pop3)
Answer: AB

Network Appliance examen   NS0-102 examen   NS0-102   NS0-102   NS0-102 examen

NO.10 SnapManager for Oracle, SnapManager for SQL Server, and SnapManager for Exchange are all part
of which NetApp Manageability Software suite?
A. Data Suite
B. Server Suite
C. Storage Suite
D. Application Suite
Answer: D

Network Appliance   NS0-102 examen   NS0-102

NO.11 Which feature of the NearStore VTL solution enables it to useup to 50% fewer physical tapes than other
VTLs?
A. shadow tapes
B. tape smart sizing
C. self tuning
D. tape compressor
Answer: B

Network Appliance examen   NS0-102 examen   NS0-102 examen   NS0-102

NO.12 What are two features that NetApp DataFort has that Microsoft's free EFS does not? (Choose two.)
A. FIPS hardware key security
B. CryptoShred
C. CryptoLock
D. SAN user-aware authentication
Answer: AB

certification Network Appliance   NS0-102 examen   NS0-102   NS0-102 examen   NS0-102   NS0-102

NO.13 Which three requirements do NetApp core data storage systems provide to ensure patient health care
data is compliant with health care regulations? (Choose three.)
A. archival
B. security
C. disaster recovery
D. high availability
E. high performance
Answer: ABC

Network Appliance   NS0-102   certification NS0-102   NS0-102

NO.14 What is a function of NetApp FlexClone technology?
A. It allows copies of database data sets with no additional space usage.
B. It shrinks volumes and LUNs.
C. It compresses databases.
D. It validates every block written by the database to the storage.
Answer: A

Network Appliance   certification NS0-102   certification NS0-102   NS0-102   NS0-102 examen   NS0-102

NO.15 Which two NetApp replication products support heterogeneous file service environments? (Choose
two.)
A. Virtual File Manager
B. Open Systems SnapVault
C. SyncMirror
D. SnapMirror
Answer: AB

Network Appliance   NS0-102 examen   NS0-102 examen   certification NS0-102

NO.16 In a SnapManager for Exchange opportunity, which two additional software components can help you
differentiate and grow NetApp value as compared to competing solutions? (Choose two.)
A. Single Mailbox Recovery software
B. SnapVault
C. VFM
D. SnapValidator
Answer: AB

Network Appliance examen   NS0-102   NS0-102   NS0-102   NS0-102 examen

NO.17 Which capabilities does NetApp ONTAP GX provide to achieve high performance for render and
animation server farms?
A. N-Way Clustering and Global File System
B. Stretch Fabric MetroCluster and WAFL
C. Clustering with SnapMirror Sync
D. MetroCluster and RAID-DP
Answer: A

certification Network Appliance   NS0-102   NS0-102

NO.18 Which two NetApp products can be used in a customer's existing third-party Exchange storage
environment? (Choose two.)
A. Single Mailbox Recovery software
B. ReplicatorX
C. SnapManager for Exchange
D. Operations Manager
Answer: AB

Network Appliance   NS0-102   NS0-102   NS0-102 examen   NS0-102

NO.19 Which two Data ONTAP products or features benefit a customer running an Oracle decision support
system on Linux? (Choose two.)
A. CIFS
B. FlexVol
C. SnapValidator
D. Virtual Local Disks
Answer: BC

certification Network Appliance   NS0-102   NS0-102   NS0-102 examen   certification NS0-102

NO.20 Your customer wants to run a database on a NetApp storage array where they already have home
directories.
In the event of low system resources, which NetApp product can ensure that the database receives the
majority of the storage array resources?
A. FlexClone
B. FlexShare
C. SnapManager for Oracle
D. FlexCache
Answer: B

Network Appliance   NS0-102 examen   NS0-102 examen

Chaque expert dans l'équipe de Pass4Test ont son autorité dans cette industrie. Ils profitent ses expériences et ses connaissances professionnelles à préparer les documentations pour les candidats de test Certification IT. Les Q&As produites par Pass4Test ont une haute couverture des questions et une bonne précision des réponses qui vous permettent la réussie de test par une seule fois. D'ailleurs, un an de service gratuit en ligne après vendre est aussi disponible pour vous.

L'avènement de la certification Microsoft pratique d'examen 70-649 questions et réponses

Il faut une bonne préparation et aussi une série de connaissances professionnelles complètes pour réussir le test Microsoft 70-649. La ressourece providée par Pass4Test peut juste s'accorder votre demande.

Le test de Certification Microsoft 70-649 devient de plus en plus chaud dans l'Industrie IT. En fait, ce test demande beaucoup de travaux pour passer. Généralement, les gens doivent travailler très dur pour réussir.

Si vous êtes intéressé par l'outil formation Microsoft 70-649 étudié par Pass4Test, vous pouvez télécharger tout d'abord le démo. Le service de la mise à jour gratuite pendant un an est aussi offert pour vous.

Pass4Test peut vous fournir un raccourci à passer le test Microsoft 70-649: moins de temps et efforts dépensés. Vous trouverez les bonnes documentations de se former dans le site Pass4Test qui peut vous aider efficacement à réussir le test Microsoft 70-649. Si vous voyez les documentations dans les autres sites, c'est pas difficile à trouver qu''elles sont venues de Pass4Test, parce que lesquelles dans Pass4Test sont le plus complété et la mise à jour plus vite.

Le succès n'est pas loin de vous si vous choisissez Pass4Test. Vous allez obtenir le Certificat de Microsoft 70-649 très tôt. Pass4Test peut vous permettre à réussir 100% le test Microsoft 70-649, de plus, un an de service en ligne après vendre est aussi gratuit pour vous.

Le test Microsoft 70-649 est l'un très improtant dans tous les tests de Certification Microsoft, mais c'est toujours difficile à obtenir ce Certificat. La présence de Pass4Test est pour soulager les candidats. L'équipe de Pass4Test peut vous aider à économiser le temps et l'éffort. Vous pouvez passer le test sans aucune doute sous l'aide de notre Q&A.

Pass4Test est un fournisseur professionnel des documentations à propos du test Certification IT, avec lequel vous pouvez améliorer le future de votre carrière. Vous trouverez que nos Q&As seraient persuadantes d'après d'avoir essayer nos démos gratuits. Le démo de Microsoft 70-649 (même que les autres démos) est gratuit à télécharger. Vous n'aurez pas aucune hésitation après travailler avec notre démo.

Code d'Examen: 70-649

Nom d'Examen: Microsoft (TS: Upgrading Your MCSE on Windows Server 2003 to Windows Server 2008, Technology Specialist)

Questions et réponses: 196 Q&As

70-649 Démo gratuit à télécharger: http://www.pass4test.fr/70-649.html

NO.1 Your network contains three servers that run Windows Server 2008 R2. The servers are configured as
shown in the following table.
Server1 has Remote Desktop Services Per Device client access licenses (RDS Per Device CALs)
installed. Server2 and Server3 are members of a Remote Desktop Connection Broker (RD Connection
Broker) farm. Four months after Server2 and Server3 are deployed, you discover that users can no longer
establish Remote Desktop sessions on Server3. You verify that Server3 is online and that all required
services on Server3 run properly. You verify that the users can establish Remote Desktop sessions on
Server2. You need to ensure that the users connecting to the RD Connection Broker farm can establish
sessions on Server3. What should you do?
A. On Server3, enable dedicated farm redirection.
B. On Server3, configure the Remote Desktop licensing settings.
C. On Server1, install additional RDS Per Device CALs.
D. On Server1, run the Manage RDS CALs wizard and click the Migrate action.
Answer: B

Microsoft examen   70-649   70-649   certification 70-649   70-649

NO.2 You have a test lab that contains 20 client computers and a server named Server1. The client
computers run Windows 7. Server1 runs Windows Server 2008 Service Pack 2 (SP2). You install the Key
Management Service (KMS) on Server1. You need to ensure that the client computers can successfully
activate by using Server1. What should you do?
A. Upgrade Server 1 to Windows Server 2008 R2.
B. Deploy five additional client computers that run Windows 7.
C. On each client computer, run slmgr.vbs /rearm.
D. On Server1, restart the Windows Activation Technologies service.
Answer: B

Microsoft examen   certification 70-649   70-649 examen   70-649 examen   70-649 examen

NO.3 Your network contains a server named Server1. Server1 has the Remote Desktop Session Host (RD
Session Host) role service installed. You need to ensure that when a user disconnects a Remote Desktop
connection, the connection is forcibly terminated after 30 minutes. Which RDP-Tcp settings should you
configure?
A. Client Settings
B. Environment
C. Log on Settings
D. Sessions
Answer: D

Microsoft   70-649   70-649

NO.4 Your network contains a server named Server1 that runs Windows Server 2008 R2. You plan to create
an image of Server1 to deploy to additional servers. You need to identify how many more times you can
rearm the Windows activation clock. What should you run on Server1?
A. msinfo32.exe
B. slmgr.vbs /dlv
C. slui.exe
D. winrm.vbs enumerate
Answer: B

certification Microsoft   70-649   70-649 examen   70-649

NO.5 Your network contains an Active Directory domain named contoso.com. All servers run Windows Server
2008 R2. Routers on the network support multicast transmissions. A server named Server1 has the
Windows Deployment Services (WDS) server role installed. A custom Windows 7 image is available for
download from Server1. You need to deploy the image to 100 new computers by using multicast. The
solution must prevent computers that use low-bandwidth connections from slowing the deployment to
computers that use high-bandwidth connections. What should you do.?
A. Enable Auto-Cast.
B. Enable Scheduled-Cast.
C. From the WDS server properties, adjust the Transfer Settings.
D. From the WDS server properties, modify the Multicast IP Address settings.
Answer: C

Microsoft   70-649 examen   70-649 examen

NO.6 Your network contains two servers named Server1 and Server2 that run Windows Server 2008 R2.
Server1 and Server2 have the Hyper-V server role and the Failover Clustering feature installed. You
deploy a new virtual machine (VM) named VM1 on Server1.You need to ensure that VM1 is available if
one of the Hyper-V servers fails. What should you do?
A. Install the Network Load Balancing (NLB) feature on VM1.
B. Install the Network Load Balancing (NLB) feature on Server1.
C. Install the Failover Clustering feature on VM1. From Failover Cluster Manager on VM1, click Configure
a Service or Application.
D. From Failover Cluster Manager on Server1, click Configure a Service or Application.
Answer: D

Microsoft   70-649 examen   70-649   certification 70-649

NO.7 Your network contains two standalone servers named Server1 and Server2. Server1 has Microsoft
SQL Server 2008 Reporting Services installed. Server2 has the SMTP Server feature installed. You
configure the Reporting Services on Server1 to send reports by using Server2. You need to ensure that
Server2 sends the reports. What should you do on Server2?
A. Configure a smart host.
B. Configure TLS encryption.
C. Modify the Relay restrictions settings.
D. Modify the Connection control settings.
Answer: C

certification Microsoft   70-649 examen   70-649   70-649

NO.8 Your network contains a server named Server1 that runs Windows Server 2008 R2. Server1 has the
Remote Desktop Session Host (RD Session Host) role service installed. You need to ensure that Remote
Desktop users can use the user interface elements of Windows Aero. What should you do on Server1?
A. Change the display settings.
B. Add the Desktop Experience feature.
C. Install a DirectX 10 compliant video adapter.
D. Add the Quality Windows Audio Video Experience feature.
Answer: B

Microsoft   70-649   70-649   70-649

NO.9 Your network contains a server named Server1 that runs Windows Server 2008 R2. Server1 has the
Remote Desktop Gateway (RD Gateway) role service installed. You add the Domain Users group to a
connection authorization policy named TS_CAP_01. You need to ensure that only client computers that
have Windows Firewall enabled can connect to Remote Desktop resources through the RD Gateway.
What should you do?
A. From Remote Desktop Gateway Manager, modify the properties of the TS_RAP_01 resource
authorization policy.
B. From Remote Desktop Gateway Manager, modify the properties of the TS_CAP_01 connection
authorization policy.
C. From the Network Policy Server console, modify the properties of the TS_CAP_01 network policy.
D. From the Network Policy Server console, modify the properties of the TS GATEWAY AUTHORIZATION
POLICY connection request policy.
Answer: C

certification Microsoft   70-649 examen   70-649   70-649 examen

NO.10 Your network contains three servers that run Windows Server 2008 R2. The servers are configured as
shown in the following table.
Server1 and Server2 are members of an RD Session Host server farm named farm1.contoso.com. You
configure the RD Connection Broker role service on Server3 to support farm1.contoso.com. You need to
create DNS records to support RD Connection Broker load balancing. Which record or records should
you create for farm1.contoso.com?
A. one Alias (CNAME) record
B. one Host (AAAA) record
C. two Host (A) records
D. two service location (SRV) records
Answer: C

Microsoft   certification 70-649   70-649 examen   70-649

NO.11 Your network contains a server that has the Remote Desktop Session Host (RD Session Host) role
service installed. You need to increase the bandwidth that is allocated for printing and for file transfers
between the RD Session Host server and the Remote Desktop clients. What should you do?
A. On the server, modify the RDP-Tcp settings.
B. On the server, modify the Flow Control Channel Band width registry setting.
C. On the clients, modify the Flow Control Display Band width registry setting.
D. On the clients, modify the Local Resources settings of the Remote Desktop connections.
Answer: B

Microsoft   70-649   certification 70-649   certification 70-649

NO.12 Your network contains a Web server that runs Windows Server 2008 R2. Remote management is
configured for Internet Information Services (IIS). From IIS Manager Permissions, you add a user to a
Web site. You need to prevent the user from using Internet Information Services (IIS) Manager to modify
the authorization rules of the Web site. Which settings should you configure?
A. Authorization Rules
B. Feature Delegation
C. IIS Manager Permissions
D. IIS Manager Users
Answer: B

Microsoft examen   70-649   certification 70-649   certification 70-649

NO.13 Your network contains two servers.
The servers are configured as shown in the following table.
You need to limit the display quality of Remote Desktop connections. What should you do?
A. Create a Remote Desktop resource allocation policy (RD RAP) on Server2.
B. Create a Windows System Resource Manager (WSRM) resource allocation policy on Server1.
C. Edit the properties of the RDP-Tcp connection on Server1.
D. Edit the properties of the Remote Desktop connection authorization policy (RD CAP) on Server2.
Answer: C

certification Microsoft   certification 70-649   70-649 examen   70-649   certification 70-649   70-649

NO.14 Your network contains a server named Server1 that runs Windows Server 2008 R2. Server1 has the
following Remote Desktop Services (RDS) role services installed: Remote Desktop Session Host (RD
Session Host) Remote Desktop Web Access (RD Web Access) You publish 10 Remote App programs on
Server1 by using RD Web Access. You need to ensure that when users log on to the RD Web Access
page, they see only the Remote App programs assigned to them.
What should you modify from Remote App Manager?
A. the properties of each Remote App program
B. the RD Gateway Settings
C. the RDP Settings
D. the RD Session Host Server Settings
Answer: A

Microsoft   70-649 examen   70-649   70-649

NO.15 Your network contains an Active Directory domain. The domain contains two servers named Server1
and Server2. You connect Server1 and Server2 to a logical unit number (LUN) on a Storage Area Network
(SAN). You need to ensure that you can use the LUN in a failover cluster. What should you do?
A. From Server Manager, run the Best Practices Analyzer.
B. From File Server Resource Manager, generate a storage report.
C. From Failover Cluster Manager, run the Validate a Configuration Wizard.
D. From Share and Storage Management, verify the advanced settings of the LUN.
Answer: C

Microsoft   70-649   70-649 examen   70-649   70-649   70-649 examen

NO.16 Your network contains a server named Server1 that has the Hyper-V server role installed. Server1 hosts
a virtual machine (VM) named VM1. You add an additional hard disk to Server1. The hard disk is
configured as a basic disk. You need to configure VM1 to use the new hard disk as a pass-through disk.
What should you do before you configure the pass-through disk?
A. Create a simple volume.
B. Take the new hard disk offline.
C. Convert the new hard disk to a GPT disk.
D. Convert the new hard disk to a dynamic disk.
Answer: B

Microsoft   70-649   certification 70-649   70-649   certification 70-649

NO.17 Your network contains a server named Server1 that runs Windows Server 2008 R2. Server1 has the
Windows Deployment Services (WDS) server role and the Windows Automated Installation Kit (Windows
AIK)installed. You create a new x86 Microsoft Windows Preinstallation Environment (Windows PE) image
and add it as a boot image to Server1. You run the Create Capture Image wizard and receive the following
error message: "The Windows Deployment Services Image Capture Wizard could not be located in the
specified Windows PE image." You need to ensure that you can create a capture image by using the
Create Capture Image wizard. What should you do first?
A. Create an x64 Windows PE image and add the image to Server1 as a boot image.
B. Add a new boot image to Server1 and specify the Sources\Boot.wim file from the Windows Server
2008 R2 installation media.
C. Mount the Windows PE boot image and add the contents of the% program Files%\Windows
AIK\Tools\amd64 folder to the image.
D. Mount the Windows PE boot image and add the contents of the %program Files%\Windows
AIK\Tools\PE Tools folder to the image.
Answer: B

certification Microsoft   70-649 examen   70-649

NO.18 You manage a member server that runs Windows Server 2008 R2. The server has the Web Server (IIS)
server role installed. The Web server hosts a Web site named Intranet1. Only internal Active Directory
user accounts have access to the Web site. The authentication settings for Intranet1 are configured as
shown in the exhibit. (Click the Exhibit button.)
You need to ensure that users authenticate to the Web site by using only the Microsoft Challenge
Handshake Authentication Protocol version 2 (MS-CHAPv2) encrypted Active Directory credentials.
Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)
A. Add the Digest Authentication role service and the URL Authorization role service to the server.
B. Add the Windows Authentication roleserviceto IIS.Configure the Windows Authentication setting to
Enabled in the Intranet1 properties.
C. Configure the Basic Authentication setting to Disabled in the Intranet1 properties.
D. Configure the Default domain field for the Basic Authentication settings on Intranet1 by adding the
name of the Active Directory domain.
E. Configure the Basic Authentication setting to Disabled and the Anonymous Authentication setting to
Enabled in the Intranet1 properties.
Answer: BC

certification Microsoft   70-649   certification 70-649   certification 70-649

NO.19 Your network contains a server named Server1 that has two volumes named C and D. You add a new
volume. You need to ensure that you can access data on the new volume by using the path D:\data. What
should you do?
A. From Disk Management, create a volume mount point.
B. From Disk Management, attach a virtual hard disk (VHD).
C. At the command prompt, run the diskraid.exe command and specify the /v parameter.
D. At the command prompt, run the dism.exe command and specify the /mount-wim parameter.
Answer: A

Microsoft   70-649 examen   70-649 examen   70-649   70-649

NO.20 Your network contains a server named Server1 that runs Windows Server 2008 R2. Server1 has the
Hyper-V server role installed. Server1 hosts a virtual machine (VM) named VM1. You take a snapshot of
VM1 at 05:00 and at 19:00. You use Hyper-V Manager to delete the snapshot taken at 05:00. You need to
ensure that the files created by the 05:00 snapshot are deleted from the hard disk on Server1. What
should you do?
A. At the command prompt, run the rmdir.exe command.
B. From Windows Power Shell, run the Remove-Item cmdlet.
C. From the Hyper-V Manager console, shut down VM1.
D. From the Hyper-V Manager console, right-click VM1 and click Revert.
Answer: C

Microsoft   certification 70-649   70-649   70-649

Nous sommes clairs que ce soit necessaire d'avoir quelques certificats IT dans cette industrie de plus en plus intense. Le Certificat IT est une bonne examination des connaissances démandées. Dans l'Industrie IT, le test Microsoft 70-649 est une bonne examination. Mais c'est difficile à passer le test Microsoft 70-649. Pour améliorer le travail dans le future, c'est intélligent de prendre une bonne formation en coûtant un peu d'argent. Vous allez passer le test 100% en utilisant le Pass4Test. Votre argent sera tout rendu si votre test est raté.

Microsoft MB2-631 examen pratique questions et réponses

Nous assurons seulement le succès de test certification, mais encore la mise à jour est gratuite pour vous. Si vous ne pouvez pas passer le test, votre argent sera 100% rendu. Toutefois, cette possibilité n'est presque pas de se produire. Vous pouvez tout d'abord télécharger le démo gratuit pour prendre un essai.

Est-ce que vous vous souciez encore de réussir le test Microsoft MB2-631? Est-ce que vous attendez plus le guide de formation plus nouveaux? Le guide de formation vient de lancer par Pass4Test peut vous donner la solution. Vous pouvez télécharger la partie de guide gratuite pour prendre un essai, et vous allez découvrir que le test n'est pas aussi dur que l'imaginer. Pass4Test vous permet à réussir 100% le test. Votre argent sera tout rendu si vous échouez le test.

Le guide d'étude sorti de Pass4Test comprend les expériences résumées par nos experts, les matériaux et les Q&As à propos de test Certification Microsoft MB2-631. Notre bonne réputation dans l'industrie IT sera une assurance 100% à réussir le test Microsoft MB2-631. Afin de vous permettre de choisir Pass4Test, vous pouvez télécharger gratuitement le démo de Q&A tout d'abord.

Il y a plusieurs de façons pour réussir le test Microsoft MB2-631, vous pouvez travailler dur et dépenser beaucoup d'argents, ou vous pouvez travailler plus efficacement avec moins temps dépensés.

Code d'Examen: MB2-631

Nom d'Examen: Microsoft (CRM 4.0 Customization and Configuration)

Questions et réponses: 95 Q&As

Pass4Test est un site de provider les chances à se former avant le test Certification IT. Il y a de différentes formations ciblées aux tous candidats. C'est plus facile à passer le test avec la formation de Pass4Test. Parmi les qui ont déjà réussi le test, la majorité a fait la préparation avec la Q&A de Pass4Test. Donc c'est pourquoi, Pass4Test a une bonne réputation dansn l'Industrie IT.

Vous pouvez télécharger le démo gratuit pour prendre un essai. Vous aurez plus confiance sur Pass4Test. N'hésitez plus à choisir la Q&A Microsoft MB2-631 comme votre guide d'étude.

Le test Microsoft MB2-631 est test certification très répandu dans l'industrie IT. Vous pourriez à améliorer votre niveau de vie, l'état dans l'industrie IT, etc. C'est aussi un test très rentable, mais très difficile à réussir.

MB2-631 Démo gratuit à télécharger: http://www.pass4test.fr/MB2-631.html

NO.1 Which combination of Microsoft Dynamics CRM security privileges allows a user to attach a Note to an
Account?
Select the best answer.
A.Read privilege on the Note. Write privilege on the Account.
B.Share privilege on the Note. Write privilege on the Account.
C.Append privilege on the Note. Append To privilege on the Account.
D.Append To privilege on the Note. Append privilege on the Account.
Answer: C

Microsoft   MB2-631 examen   MB2-631   MB2-631   certification MB2-631   MB2-631 examen

NO.2 Your Microsoft Dynamics CRM 4.0 organization has been set up with a default currency of United
Kingdom Pounds (GBP). In your personal preferences you have specified a default currency of Euros
(EUR). One of the Accounts in CRM, Fabrikam Inc., has a currency of US Dollars (USD). From the Sales
area you select New Quote and then add Fabrikam Inc. as the potential customer.
What currency will be set on the new Quote?
A.USD
B.GBP
C.EURO
D.No currency will be set by default
Answer: C

Microsoft   MB2-631   certification MB2-631

NO.3 Several currencies are in use in Microsoft Dynamics CRM 4.0, and the base currency is US Dollars.
You update the exchange rates daily using an imported CSV file. Which of the following actions will cause
the new exchange rates to be used on an Opportunity record?
Choose the 2 that apply.
A.Updating a non-financial field on an Opportunity record.
B.Changing the status of an Opportunity record.
C.Assigning an Opportunity record to a different user.
D.Updating a financial field on an Opportunity record.
Answer: BD

Microsoft examen   MB2-631   MB2-631   certification MB2-631

NO.4 You are the implementation consultant at Fabrikam Inc. Fabrikam initially bought 20 user licenses for
Microsoft Dynamics CRM Dynamics 4.0, which are all in use. What will happen if you attempt to add a
new user to Microsoft Dynamics CRM?
A.You will not be permitted to add a new user account
B.The new user account will be created, and the Restricted Access Mode option will be automatically set
on the account.
C.The new user account will be created, and it will be assigned the user license from another active user.
D.The new user account will be created, but it will be disabled.
Answer: D

Microsoft   MB2-631 examen   MB2-631

NO.5 You are an administrator for a company which has approximately 1000 CRM users. You employ four
groups of contract staff, who work for different parts of your business. Each group consists of ten users
who need access to the CRM system for one week each month. The users should not be allowed access
the rest of the month.
How can you do this in the most efficient way?
A.Create a new child Business Unit for each group of contract staff, and add the appropriate group of ten
users to each Business Unit. Enable the appropriate Business Unit when the users need access, and
disable the Business Unit when you want to prevent access.
B.Create a new child Business Unit for each group of contract staff, and add the appropriate group of ten
users to each Business Unit. Remove the users from their Business Unit when you want to prevent
access.
C.Add all the users to CRM. Enable each user when you want to allow access, and disable each user
when you want to prevent access.
D.Create a Business Unit and add all the users to it. When the users are finished delete the Business Unit.
Recreate the Business Unit when the users need access again.
Answer: A

Microsoft examen   MB2-631   certification MB2-631

NO.6 You are a Microsoft CRM Consultant and have been asked to advise a company on their Business Unit
structure. When the company installed Microsoft Dynamics CRM 4.0 they named the root Business Unit
Adventure Work Cycle, missing the s from Works. The company has asked you how they can change this.
What action do you take?
A.Edit the Business Unit name and correct the spelling, save and publish to all users.
B.Disable the Business Unit and create a new one with the correct spelling.
C.Uninstall and re-install Microsoft Dynamics CRM 4.0 using the correct spelling.
D.Create a new Business Unit with the correct spelling, assign it to the original root and then disable the
original root.
Answer: C

certification Microsoft   MB2-631   certification MB2-631

NO.7 You work for a company where Microsoft Dynamics CRM 4.0 has been installed and customized with
the English language. In addition, you have installed the Spanish language pack on the server. You have
installed and enabled the Spanish language option in your Microsoft Dynamics CRM 4.0 Client for Office
Outlook with offline access. When you open the Microsoft Dynamics CRM 4.0 Client for Office Outlook
with offline access, what areas of the application are affected?
Choose the 2 that apply.
A.Standard Microsoft Office Outlook Menu Options.
B.Microsoft Office Outlook Folders specific to Microsoft Dynamics CRM.
C.Custom picklists.
D.Offline Synchronization user interface.
Answer: BD

Microsoft   MB2-631 examen   MB2-631 examen   MB2-631   certification MB2-631

NO.8 You have been asked to set the access level for sales users to a custom entity called Project that is
user owned. The requirement is for the sales users to be able to view Projects within their business unit
and only create new Projects for themselves. You copy the Salesperson role and make a change to it
ready to assign to sales users. What security settings should be set on the Project entity?
A.Read privilege with access level set to Parent: Child Business Unit.Create privilege with access level
set to User.
B.Read privilege with access level set to Business Unit.Create privilege with access level set to User.
C.Read privilege with access level set to User.Create privilege with access level set to Business Unit.
D.Read privilege with access level set to Organization.Create privilege with access level set to User.
Answer: B

Microsoft   MB2-631   certification MB2-631   MB2-631   MB2-631   MB2-631

NO.9 The General tab of the Account form contains the following fields: Alias Name and Rating. The Alias
Name field has a requirement level of Business Required. The Rating field has a requirement level of No
Constraint. You have been asked to move these two fields onto a new tab called Ratings.
How would you do this as efficiently as possible?
A.Change the requirement level of the Alias Name field to No Constraint.In the Form Editor, add a new tab
and a new section.Edit the two fields, and change their location to this new tab and section.Change the
requirement level of the Alias Name field back to Business Required.
B.In the Form Editor, add a new tab and a new section.Edit the two fields, and change their location to this
new tab and section.
C.In the Form Editor, add a new tab.Edit the two fields, and change their location to this new tab.
D.In the Form Editor, add a new tab and a new section.Remove the two fields from the general tab, then
add them to the new tab and section.
Answer: B

certification Microsoft   MB2-631   MB2-631   certification MB2-631   MB2-631 examen   MB2-631

NO.10 You have recently taken over responsibility for customizing your companys Microsoft Dynamics CRM
4.0 implementation, and have been asked to rename two entities; a system entity (lead) and a custom
entity (supplier). What task do you need to perform on the lead entity, which is not needed for the supplier
entity?
A.Rename the entity views to reflect the new name.
B.Change the Name and Plural Name.
C.Change the text in the messages associated with the entity.
D.Publish the changes to the entity.
Answer: C

Microsoft   MB2-631   certification MB2-631   MB2-631   certification MB2-631   MB2-631

Dans ce monde d'informatique, l'industrie IT est suivi par de plus en plus de ges. Dans ce domaine demandant beaucoup de techniques, il faut des Certificat à se preuver les techniques professionnelle. Les Certificats IT sont improtant pour un interviewé pendant un entretien. C'est pas facile à passer le test Microsoft MB2-631, donc c'est pourquoi beaucoup de professionnels qui choisissent ce Certificat pour se preuver.

Le dernier examen Microsoft MB5-627 gratuit Télécharger

Aujourd'hui, c'est une société pleine de gens talentueux, la meilleure façon de suivre et assurer la place dans votre carrière est de s'améliorer sans arrêt. Si vous n'augmentez pas dans votre carrière, vous êtes juste sous-développé parce que les autres sont meilleurs que vous. Pour éviter ce cas, vous devez vous former successivement.

Il faut une bonne préparation et aussi une série de connaissances professionnelles complètes pour réussir le test Microsoft MB5-627. La ressourece providée par Pass4Test peut juste s'accorder votre demande.

Le test Microsoft MB5-627 est une examination de techniques professionnelles dans l'Industrie IT. Pass4Test est un site qui peut vous aider à réussir le test Microsoft MB5-627 rapidement. Si vous utiliser l'outil de formation avant le test, vous apprendrez tous essences de test Certification Microsoft MB5-627.

Vous pouvez comparer un peu les Q&As dans les autres sites web que lesquelles de Pass4Test, c'est pas difficile à trouver que la Q&A Microsoft MB5-627 est plus complète. Vous pouvez télécharger le démo gratuit à prendre un essai de la qualité de Pass4Test. La raison de la grande couverture des questions et la haute qualité des réponses vient de l'expérience riche et la connaissances professionnelles des experts de Pass4Test. La nouvelle Q&A de Microsoft MB5-627 lancée par l'équipe de Pass4Test sont bien populaire par les candidats.

Code d'Examen: MB5-627

Nom d'Examen: Microsoft (C5 4.0 System Consultant)

Questions et réponses: 90 Q&As

Le Certificat Microsoft MB5-627 est un passport rêvé par beaucoup de professionnels IT. Le test Microsoft MB5-627 est une bonne examination pour les connaissances et techniques professionnelles. Il demande beaucoup de travaux et efforts pour passer le test Microsoft MB5-627. Pass4Test est le site qui peut vous aider à économiser le temps et l'effort pour réussir le test Microsoft MB5-627 avec plus de possibilités. Si vous êtes intéressé par Pass4Test, vous pouvez télécharger la partie gratuite de Q&A Microsoft MB5-627 pour prendre un essai.

MB5-627 Démo gratuit à télécharger: http://www.pass4test.fr/MB5-627.html

NO.1 Can you create a credit note based upon a purchase invoice that has already been updated?
A.Yes, via Customer/Periodic
B.Yes, via Purchase/Periodic
C.Yes, via Purchase/Table/Purchase archive
D.No
Answer: C

Microsoft   certification MB5-627   MB5-627   MB5-627   MB5-627 examen

NO.2 Should there be a date balance in a general journal before this can be booked?
A.No
B.Yes, always
C.Depends on the parameter
D.Depends on how the vouchers are entered
Answer: C

Microsoft examen   certification MB5-627   certification MB5-627

NO.3 Can entries in a customer account be exchange rate adjusted?
A.Yes, but only manually via a general journal
B.Yes, via an automatic exchange rate adjustment job
C.Yes, but only if you use a minimum of 3 different currencies
D.No
Answer: B

certification Microsoft   certification MB5-627   MB5-627

NO.4 Can you post 2 vouchers with the same voucher number?
A.Yes, if the vouchers are each posted in their fiscal year
B.Yes, if the vouchers are each posted in the same fiscal year
C.No, this is not possible
D.Depends on the parameter
Answer: D

Microsoft examen   MB5-627   MB5-627   certification MB5-627

NO.5 Is it possible to create a budget based upon realized entries from previous years?
A.No
B.Yes, but only if these are manually calculated and entered via the budget journal
C.Yes, if you use the extended budgeting facilities
D.Yes, but only if you have budgeted in previous years
Answer: C

certification Microsoft   certification MB5-627   certification MB5-627   MB5-627 examen

NO.6 In the Customer table, can you specify that a customer shall also act as a vendor?
A.No
B.Yes, if you create a customer group called Vendor
C.Yes, if you select this from the Vendor field
D.A customer is always a vendor as well
Answer: A

Microsoft   certification MB5-627   MB5-627 examen

NO.7 Action lists can be used to...?
A.Create your own jobs
B.Group your customers
C.Group your vendors
D.Reconcile the balances of the various modules
Answer: A

Microsoft   MB5-627   MB5-627

NO.8 Can you change the account number for a customer?
A.No, you have to re-create the customer
B.Yes, but the entries for the customer are deleted
C.Yes, but only for customers without open entries
D.Yes, always
Answer: D

Microsoft   MB5-627 examen   certification MB5-627   certification MB5-627   certification MB5-627

NO.9 Can you prevent one customer from ever receiving a debt recovery letter while all other customers are
able to receive debt recovery letters?
A.No
B.Yes, this is specified where the reminder codes are created
C.Yes, this is specified in the Customer table
D.Yes, this is specified in the Vendor table
Answer: C

Microsoft   MB5-627   certification MB5-627   certification MB5-627

NO.10 Which of these allocation procedures can be performed?
A.Allocation between G/L accounts
B.Allocation between companies
C.Allocation between employees
D.Allocation between vendor accounts
Answer: A

Microsoft examen   MB5-627   MB5-627   MB5-627   certification MB5-627

NO.11 What effect does selecting "System" in the Access field of the G/L table have?
A.The system can post the accounts, but the user cannot
B.The system cannot automatically post the accounts
C.Neither the system nor the user can post the accounts
D.Both the system and the user can post the accounts
Answer: A

Microsoft   MB5-627   MB5-627   MB5-627

NO.12 How many times can you create opening entries?
A.Once per fiscal year
B.Twice per fiscal year
C.As often as you want, up until the period is closed
D.As often as you want
Answer: D

Microsoft examen   certification MB5-627   MB5-627

NO.13 Can you write a longer free text on an invoice?
A.Yes, by using the notes field
B.Yes, the text field may contain an unlimited number of characters
C.No
D.No, the limit is 10 characters.
Answer: A

Microsoft   MB5-627   MB5-627   certification MB5-627

NO.14 Can you decide which voucher series a general journal shall use?
A.Yes, this is selected under G/L/Setup/Voucher series
B.Yes, this is selected under G/L/Setup/Journal name
C.No
D.Yes, this is selected under the posting parameters
Answer: B

Microsoft examen   MB5-627 examen   MB5-627 examen

NO.15 What significance does setting up a customer as a non-recur. cust. have?
A.Invoicing can only be carried out once
B.It is first of significance when you want to delete the customer
C.Invoicing can only be carried out once and the customer is deleted after usage
D.Only one invoice and payment of the invoice can be registered
Answer: B

Microsoft examen   MB5-627   MB5-627

NO.16 How does a standing G/L journal work?
A.The journal is saved after posting
B.Entry lines in the journal are saved after posting
C.The journal is posted automatically every month
D.The Cash report is printed A4 height instead of A4 width
Answer: B

certification Microsoft   MB5-627   MB5-627   MB5-627

NO.17 What effect does it have, if an item is set up without specifying an item group?
A.You run the risk of posting on the error accounts
B.The Statistics section does not work
C.The item acts as a service
D.You are not allowed to create the item
Answer: D

certification Microsoft   MB5-627   MB5-627   certification MB5-627

NO.18 Can you post a sales invoice without entering item lines?
A.Yes, you can enter the invoice amount in Customer/Daily in the tab Statistics
B.Yes, in a General journal
C.Yes, but only if the Order module is used
D.No
Answer: B

Microsoft   certification MB5-627   certification MB5-627   MB5-627   certification MB5-627

NO.19 How do you specify if it is compulsory to post items into an account with a department specification?
A.G/L/Daily
B.General/Table/Departments
C.G/L/Table
D.G/L/Setup/Parameters
Answer: C

Microsoft examen   MB5-627 examen   MB5-627   certification MB5-627

NO.20 How many general journals can be created?
A.One per user
B.One general and one standing journal
C.One general and one standing journal per user
D.Optional
Answer: D

Microsoft   MB5-627   MB5-627 examen   MB5-627

Pass4Test vous permet à réussir le test Certification sans beaucoup d'argents et de temps dépensés. La Q&A Microsoft MB5-627 est recherchée par Pass4Test selon les résumés de test réel auparavant, laquelle est bien liée avec le test réel.

Les meilleures Microsoft 70-663 examen pratique questions et réponses

Pour réussir le test Microsoft 70-663 demande beaucoup de connaissances professionnelles IT. Il n'y a que les gens qui possèdent bien les connaissances complètes à participer le test Microsoft 70-663. Maintenant, on a les autres façons pour se former. Bien que vous n'ayez pas une connaissance complète maintenant, vous pouvez quand même réussir le test Microsoft 70-663 avec l'aide de Pass4Test. En comparaison des autres façons, cette là dépense moins de temps et de l'effort. Tous les chemins mènent à Rome.

Bien qu'Il y ait plein de talentueux dans cette société, il manque beaucoup de professionnels dans les domaine en cours de développement, l'Industrie IT est l'un de ces domaines. Donc le test Microsoft 70-663 est un bon l'examination de technique informatique. Pass4Test est un site d'offrir la formation particulière au test Microsoft 70-663.

Vous allez choisir Pass4Test après essayer une partie de Q&A Microsoft 70-663 (gratuit à télécharger). Le guide d'étude produit par Pass4Test est une assurance 100% à vous aider à réussir le test Certification Microsoft 70-663.

Pass4Test est un fournisseur important de résume du test Certification IT dans tous les fournissurs. Les experts de Pass4Test travaillent sans arrêt juste pour augmenter la qualité de l'outil formation et vous aider à économiser le temps et l'argent. D'ailleur, le servie en ligne après vendre est toujours disponible pour vous.

Code d'Examen: 70-663

Nom d'Examen: Microsoft (Pro: Designing and Deploying Messaging Solutions with Microsoft Exchange Server 2010)

Questions et réponses: 275 Q&As

70-663 Démo gratuit à télécharger: http://www.pass4test.fr/70-663.html

NO.1 You have an Exchange Server 2010 Hub Transport server named Hub1.
You install an application on a third-party server named Server1.
You discover that the application cannot authenticate to remote servers.
You need to ensure that the application can relay e-mail messages by using Hub1.
What should you do?
A.Create a new Send connector
Add the TCP/IP address of Server1 to the Send connector
Modify the permissions for the Send connector
B.Create a new Receive connector
Add the TCP/IP address of Server1 to the Receive connector
Modify the permissions for the Receive connector
C.Add the TCP/IP address of Server1 to the default Receive connector
Create a message classification
Create a transport rule
D.Add the TCP/IP address of Server1 to the Client Receive connector
Create a remote domain
Create a transport rule
Answer: B

certification Microsoft   70-663 examen   70-663

NO.2 A corporate environment will include client computers that run Microsoft Outlook 2010.Email services
will be provided to some users by a cloud-based Exchange Server 2010 SP1 service provider and to
other users by an on-premise deployment of Exchange Server 2010 SP1.
You need to recommend a solution that will allow users in the cloud-based environment to receive internal
Out of Office replies from users in the on-premise environment.
What should you recommend?
A.Create a transport rule.
B.Create a remote domain.
C.Create an accepted domain.
D.Create an organization relationship.
Answer: B

Microsoft   70-663 examen   70-663   70-663   70-663   70-663

NO.3 Contoso, Ltd.has an Exchange Server 2010 environment that accepts email for the contoso.com email
domain.Fabrikam, Inc.has an Exchange Server 2010 environment that accepts mail for the fabrikam.com
email domain.
Contoso acquires Fabrikam and establishes an internal network connection between the two
companies.After the acquisition, only the Contoso Exchange Server environment accepts external
email.You have the following requirements:
Retain existing fabrikam.com email addresses.
Enable users in both Exchange Server environments to receive mail at contoso.com email addresses.
You need to recommend a solution that meets the requirements.
Which two actions should you recommend? (Each correct answer presents part of the solution.Choose
two.)
A.Create an internal send connector.
B.Create an internal receive connector.
C.Create an internal relay accepted domain for contoso.com.
D.Create an external relay accepted domain for contoso.com.
Answer: AC

Microsoft   certification 70-663   70-663   70-663 examen   certification 70-663

NO.4 A corporate environment includes an on-premise deployment of Exchange Server 2010 SP1 and an
Active Directory Domain Services (AD DS) domain.
The company plans to move some users to a cloud-based Exchange Server 2010 SP1 environment.The
migration process must meet the following requirements:
Integrate the on-premise environment with the cloud-based environment.
Migrate all existing mailbox items.
Authenticate all users by using their AD DS credentials.
Share calendar availability information among all users.
You need to recommend a tool for gathering information and verifying that the requirements can be met.
Which tool should you recommend?
A.Exchange Best Practices Analyzer
B.Exchange Deployment Assistant
C.Exchange Pre-Deployment Analyzer
D.Exchange Remote Connectivity Analyzer
Answer: B

Microsoft examen   70-663   70-663   70-663   70-663   certification 70-663

NO.5 A corporate environment includes a main office and a branch office.
The company plans to deploy Exchange Server 2010.The Mailbox servers will be part of a single
database availability group (DAG) that spans both locations.There is only intermittent connectivity
between the two locations.
You need to recommend a public folder database solution that enables users from either location to
consistently access public folders.
Which two actions should you recommend? (Each correct answer presents part of the solution.Choose
two.)
A.Configure cross-site RPC Client Access on the DAG.
B.Configure public folder referrals between the main office and the branch office.
C.Create a single public folder database in the main office and add it as a replica for the public folders.
D.Create a single public folder database in the branch office and add it as a replica for the public folders.
Answer: CD

Microsoft   70-663   certification 70-663   70-663

NO.6 A corporate environment will include Exchange Server 2010 in a single Active Directory Domain
Services (AD DS) domain.The AD DS site topology is configured as shown in the exhibit.(Click the Exhibit
button.)You are designing the Exchange Server deployment plan.You have the following requirements:
Deploy Exchange Server 2010 servers in two AD DS sites.
Maximize the security of the Exchange Server deployment.
You need to recommend a solution that meets the requirements.
Which two actions should you recommend? (Each correct answer presents part of the solution.Choose
two.)
A.Configure DC2 as a read-only global catalog server.
B.Configure DC3 as a writable global catalog server.
C.Deploy a Mailbox server, a Hub Transport server, and a Client Access server in Site A and in Site B.
D.Deploy a Mailbox server, a Hub Transport server, and a Client Access server in Site A and in Site C.
Answer: BD

Microsoft examen   70-663 examen   certification 70-663

NO.7 Your company has three offices.Each office has a direct link to the Internet.The offices connect to each
other by using a WAN link.
Your network consists of an Active Directory forest that contains two domains and one site.The functional
level of the forest is Windows Server 2003.All domain controllers run Windows Server 2003 R2.Each
office contains two domain controllers for each domain.All domain controllers are global catalog servers.
In each office, you plan to deploy Mailbox, Client Access, and Hub Transport Exchange Server 2010
servers.All e-mail messages sent to the Internet will be delivered from a local server in each office.
You need to recommend changes to the Active Directory environment to support the planned deployment
of Exchange Server 2010.
What should you recommend?
A.Disable site link bridging for the forest.
B.Modify the cost values for the default IP site link.
C.Create a separate Active Directory subnet and site object for each office.
D.Upgrade one domain controller in each office to Windows Server 2008.
Answer: C

Microsoft examen   70-663   70-663 examen

NO.8 You have an Exchange organization.All servers in the organization have Exchange Server 2010
Service Pack 1 (SP1) installed.The organization contains the servers configured as shown in the following
table.
Server name
Server role
Edge1
Edge Transport
Edge2
Edge Transport
Hub1
Hub Transport
Hub2
Hub Transport
CAS1
Client Access
CAS2
Client Access
MBX1
Mailbox
MBX2
Mailbox
You plan to deploy a line-of-business application named App1.App1 will have a built-in SMTP service that
will send e-mail messages to users in the Exchange organization.
You need to recommend a message routing solution that meets the following requirements:
Ensures that App1 can send e-mail messages to internal users.
Prevents other servers on the internal network from sending e-mail messages to internal users.
Ensures that each e-mail message received by the Exchange organization is scanned for viruses.
You install Microsoft Forefront Protection 2010 for Exchange Server on both Edge Transport servers.
Which of the following solutions is the best recommendation? (More than one answer choice may achieve
the goal.Select the BEST answer.)
A.On Hub1, install Forefront Protection 2010 for Exchange Server.
On Hub1, create a new internal Receive connector, and then configure the Remote Network settings to
include the IP address of App1.
On the server that hosts App1, configure the SMTP service to relay e-mail directly to Hub1.
B.From the properties of the default Receive connector on Edge1, configure the Remote Network settings
to include the IP address of App1, and then add the Anonymous users permission group to the Receive
connector.
On the server that hosts App1, configure the SMTP service to relay e-mail to Edge1.
C.On Hub1, install Forefront Protection 2010 for Exchange Server.
On Hub1, add the Anonymous users permission group to the default Receive connector.
On an internal DNS server, create a Mail Exchanger (MX) record that points to Hub1.
On the server that hosts App1, configure the SMTP service to relay e-mail by using DNS name resolution.
D.On Edge1, create a new internal Receive connector.
From the properties of the new Receive connector, configure the Remote Network settings to include the
IP address of App1, and then add the Anonymous users permission group to the Receive connector.
From the properties of the default internal Receive connector on Edge1, exclude the IP addresses of the
internal network.
On the server that hosts App1, configure the SMTP service to relay e-mail to Edge1.
Answer: D

Microsoft   70-663 examen   70-663

NO.9 A corporate environment will include Exchange Server 2010.
You are planning capacity for the Mailbox servers.You require 800 GB of disk space for mailbox content.
You need to recommend the minimum amount of additional space required for content indexing.
What should you recommend?
A.80 GB
B.96 GB
C.120 GB
D.160 GB
Answer: A

certification Microsoft   certification 70-663   70-663   certification 70-663

NO.10 You have a main office and five branch offices.The offices connect to each other by using a WAN link.
An Active Directory site exists for each office.Each site has a separate IP site link to all other sites.The
main office site is configured as a hub site.
You have an Exchange Server 2010 organization.
You discover that messages sent between offices are not routed through the Hub Transport servers in the
main office.
You need to ensure that all messages sent between offices are routed through the Hub Transport servers
in the main office.
What should you do?
A.Change all IP site links to SMTP site links.
B.Modify the Exchange-specific cost for each site link.
C.From the Hub Transport servers in each site, create a journal rule.
D.From the Hub Transport servers in each site, create a transport rule.
Answer: B

Microsoft   70-663   certification 70-663   certification 70-663   70-663   certification 70-663

NO.11 Your network consists of an Active Directory domain that contains the domain controllers shown in the
following table.
You plan to deploy an Exchange Server 2010 server in each site.
You need to recommend changes to the domain controllers to support the installation of Exchange Server
2010.
What should you do?
A.Enable Server2 as a global catalog server.
B.Enable Server3 as a global catalog server.
C.Reinstall Server2 to Windows Server 2008 SP2 (x64).
D.Reinstall Server3 to Windows Server 2008 SP2 (x64).
Answer: A

Microsoft   certification 70-663   certification 70-663   70-663   70-663

NO.12 A corporate environment includes an on-premise deployment of Exchange Server 2010 SP1.
The company needs to share calendar availability information with a partner.The partner is using a
cloud-based Exchange Server 2010 SP1 service.
You need to recommend a solution for sharing calendar availability information for all employees with the
partner.
What should you recommend?
A.Create a federation trust and a TXT DNS record.Then create an organization relationship with the
partner.
B.Create a federation trust and a CNAME DNS record.Then create an organization relationship with the
partner.
C. Add the partner s domain as an accepted domain.Then create a TXT DNS record and a transport
rule.
D. Add the partner s domain as an accepted domain.Then create a CNAME DNS record and a group
policy for all users.
Answer: A

Microsoft examen   70-663   70-663   certification 70-663   certification 70-663

NO.13 You are designing an Exchange organization for a company named Contoso, Ltd.All servers in the
organization will have Exchange Server 2010 Service Pack 1 (SP1) installed.
Contoso has a partner company named Fabrikam, Inc.Fabrikam has an Exchange organization that
contains only Exchange Server 2010 SP1 servers.
You plan to configure a federation trust between Fabrikam and Contoso.
You need to recommend a certificate for the federation trust.
Which of the following certificates is the best recommendation? (More than one answer choice may
achieve the goal.Select the BEST answer.)
A.a certificate from a third-party certification authority (CA)
B.a certificate from an internal certification authority (CA)
C.the self-signed certificate automatically generated by the Exchange 2010 Setup wizard
D.the self-signed certificate automatically generated by the New Federation Trust wizard
Answer: D

Microsoft examen   70-663 examen   certification 70-663   70-663 examen   certification 70-663

NO.14 You are the enterprise administrator for an Exchange Server 2010 organization.All users run Microsoft
Office Outlook 2010.
You are designing a sharing solution for your organization and a partner organization.The partner
organization also uses Exchange Server 2010.
You need to recommend a strategy for sharing information with the partner organization to meet the
following requirements:
Provide cross-organizational access to user contacts
Provide cross-organizational access to free\busy information
What should you recommend?
A.Creating cross-forest trusts
B.Implementing Federated Delegation
C.Implementing Microsoft Identify Lifecycle Manager (ILM) 2007
D.Running the Microsoft Exchange Inter-Organization Replication tool
Answer: B

Microsoft   70-663   70-663   certification 70-663   certification 70-663

NO.15 Your company has a main office and 10 branch offices.Each office has a direct link to the Internet.Each
branch office has a WAN link that connects to the main office.
Your network consists of an Active Directory forest.Each office is configured as an Active Directory site.
You plan to deploy an Exchange Server 2010 Hub Transport server in each site.
You need to design a message routing solution to meet the following requirements:
Branch office connections to the Internet must be used to deliver e-mail
Branch office servers must use the WAN link to the main office to deliver e-mail to other branch offices
Branch office servers must be prevented from sending e-mail to the Internet by using the WAN link to the
main office
The solution must minimize administrative overhead
What should you include in the solution?
A.one Send connector for each site
B.one SMTP site link for each site
C.two Send connectors for each site
D.10 Send connectors for each site
Answer: A

Microsoft examen   70-663   70-663

NO.16 You have an Exchange Server 2010 organization.
Your company acquires another company that has an Exchange Server 2010 organization.
You need to recommend a solution for the Exchange Server 2010 organization to meet the following
requirements:
All users must be able to view the global address lists ( GALs ) for both organizations
All users must be able to view free/busy information for users in both organizations
What should you include in the solution?
A.Implement Active Directory Federation Services (AD FS) Run the Microsoft Exchange
Inter-Organization Replication tool
B.Implement Microsoft Identity Lifecycle Manager (ILM) 2007
Create a two-way cross-forest trust between both organizations
C.Create a federation trust between both organizations
Implement Microsoft Identity Lifecycle Manager (ILM) 2007
Run the New Organization Relationship wizard
D.Create a two-way cross-forest trust between both organizations
Implement Active Directory Federation Services (AD FS)Run the Microsoft Exchange Inter-Organization
Replication tool
Answer: C

Microsoft examen   70-663   certification 70-663

NO.17 A corporate environment will include Exchange Server 2010 in a single Active Directory Domain
Services (AD DS) domain.The primary DNS suffix of the domain controllers is not the same as the DNS
domain name.
You are designing the Exchange Server 2010 deployment plan.
You need to recommend a solution that allows Exchange Server 2010 servers to access the domain
controllers.
What should you recommend?
A.Modify the DNS-Host-Name AD DS attribute on the domain object container.
B.Modify the NETBIOS-Name AD DS attribute on the Exchange Server computer objects.
C.Modify the msDS-AllowedDNSSuffixes AD DS attribute on the domain object container.
D.Modify the msDS-AdditionalDnsHostName AD DS attribute on the domain object container.
Answer: C

Microsoft   70-663   70-663

NO.18 A company named Contoso, Ltd.has offices in Montreal, Seattle, and Denver.An Active Directory site
exists for each office.Only the Montreal site is connected to the Internet.
You are designing an Exchange organization for Contoso.All servers in the organization will have
Exchange Server 2010 Service Pack 1 (SP1) installed.
Each office will contain two Exchange servers that each has the Mailbox, Hub Transport, and Client
Access server roles installed.
You need to recommend a deployment solution for the Client Access servers.
Which of the following solutions is the best recommendation? (More than one answer choice may achieve
the goal.Select the BEST answer.)
A.one Client Access server array in each office
round-robin DNS in each office
B.a load balancing solution in each office
round-robin DNS in the Montreal office
C.one Client Access server array in each office
a load balancing solution in each office
D.one Client Access server array that contains all of the Client Access servers
a load balancing solution in the Montreal office
Answer: C

certification Microsoft   70-663   certification 70-663   certification 70-663   70-663

NO.19 You have an Exchange Server 2003 organization.All servers have 32-bit hardware.
You plan to transition to Exchange Server 2010 and deploy new Mailbox servers.
You need to evaluate the current servers to provide recommendations for the deployment of the new
Mailbox servers.
What should you include in the evaluation?
A.number of concurrent connections to Outlook Web Access
number of mailbox databases
memory utilization
B.number of concurrent connections to Outlook Web Access
RPC latency
disk I/O latency
C.number of concurrent MAPI connections
size of mailbox databases
number of mailboxes
D.number of mailboxes
disk I/O latency
RPC latency
Answer: C

Microsoft   70-663   certification 70-663   70-663

NO.20 A corporate environment will include Exchange Server 2010.
You are designing a deployment plan for the Mailbox servers.
You need to recommend the minimum amount of physical memory that supports the following
requirements:
Use single-role Mailbox servers.
Each Mailbox server must support 22.5 GB of database cache.
How much memory should you recommend?
A.24 GB
B.32 GB
C.48 GB
D.64 GB
Answer: B

Microsoft   70-663   certification 70-663   70-663 examen   70-663

Pass4Test est un site à offrir particulièrement la Q&A Microsoft 70-663, vous pouvez non seulement aprrendre plus de connaissances professionnelles, et encore obtenir le Passport de Certification Microsoft 70-663, et trouver un meilleur travail plus tard. Les documentations offertes par Pass4Test sont tout étudiés par les experts de Pass4Test en profitant leurs connaissances et expériences, ces Q&As sont impresionnées par une bonne qualité. Il ne faut que choisir Pass4Test, vous pouvez non seulement passer le test Microsoft 70-663 et même se renforcer vos connaissances professionnelles IT.

Microsoft 070-299, de formation et d'essai

Nous assurons seulement le succès de test certification, mais encore la mise à jour est gratuite pour vous. Si vous ne pouvez pas passer le test, votre argent sera 100% rendu. Toutefois, cette possibilité n'est presque pas de se produire. Vous pouvez tout d'abord télécharger le démo gratuit pour prendre un essai.

Si vous travaillez quand même très dur et dépensez beaucoup de temps pour préparer le test Microsoft 070-299, mais ne se savez pas du tout c'est où le raccourci pour passer le test certification, Pass4Test peut vous donner une solution efficace. Vous vous sentirez magiquement jouer un effet multiplicateur.

Pass4Test est un site qui peut réalise le rêve de beaucoup de professionnels. Pass4Test peut vous donner un coup de main pour réussir le test Certification Microsoft 070-299 via son guide d'étude. Est-ce que vous vous souciez de test Certification Microsoft 070-299? Est-ce que vous êtes en cours de penser à chercher quelques Q&As à vous aider? Pass4Test peut résoudre ces problèmes. Les documentations offertes par Pass4Test peuvent vous provider une préparation avant le test plus efficace. Le test de simulation de Pass4Test est presque le même que le test réel. Étudier avec le guide d'étude de Pass4Test, vous pouvez passer le test avec une haute note.

Code d'Examen: 070-299

Nom d'Examen: Microsoft (Implementing and Administering Security in a Microsoft Windows Server 2003 Network)

Questions et réponses: 76 Q&As

Il faut une bonne préparation et aussi une série de connaissances professionnelles complètes pour réussir le test Microsoft 070-299. La ressourece providée par Pass4Test peut juste s'accorder votre demande.

Le produit de Pass4Test est réputée par une bonne qualité et fiabilité. Vous pouvez télécharger le démo grantuit pour prendre un essai, nons avons la confiance que vous seriez satisfait. Vous n'aurez plus de raison à s'hésiter en face d'un aussi bon produit. Ajoutez notre Q&A au panier, vous aurez une meilleure préparation avant le test.

070-299 Démo gratuit à télécharger: http://www.pass4test.fr/070-299.html

NO.1 You are a security administrator for your company. The network consists of two Active Directory
domains. These domains each belong to separate Active Directory forests. The domain named
graphicdesigninstitute.com is used primarily to support company employees. The domain named
fineartschool.net is used to support company customers. The functional level of all domains is Windows
Server 2003 interim mode. A one-way external trust relationship exists in which the
graphicdesigninstitute.com domain trusts the fineartschool.net domain.
A Windows Server 2003 computer named Server1 is a member of the fineartschool.net domain. Server1
provides customers access to a Microsoft SQL Server 2000 database. The user accounts used by
customers reside in the local account database on Server1. All of the customer user accounts belong to a
local computer group named Customers. SQL Server is configured to use Windows Integrated
authentication.
Your company has additional SQL Server 2000 databases that reside on three Windows Server 2003
computers. These computers are member servers in the graphicdesigninstitute.com domain. The
company's written security policy states that customer user accounts must reside on computers in the
fineartschool.net domain.
You need to plan a strategy for providing customers with access to the additional databases. You want to
achieve this goal by using the minimum amount of administrative effort.
What should you do?
A.Create a new user account in the fineartschool.net Active Directory domain for each customer. Create a
universal group in the fineartschool.net domain. Add the new customer domain user accounts as
members of the new universal group. Assign this group permissions to access the databases.
B.Create a new user account in the fineartschool.net Active Directory domain for each customer. Create a
global group in the fineartschool.net domain. Add the new customer domain user accounts as members
of the new global group. Assign this group permissions to access the databases.
C.Create a new user account in the graphicdesigninstitute.com Active Directory domain for each
customer. Create a global group in the fineartschool.net Active Directory domain. Assign the new global
group permissions to access the databases.
D.Create a new user account in the graphicdesigninstitute.com Active Directory domain for each
customer. Create a universal group in the fineartschool.net Active Directory domain. Assign the new
universal group permissions to access the databases.
Answer: B

certification Microsoft   070-299   070-299   070-299   070-299   070-299

NO.2 You are a security administrator for Contoso, Ltd. The network consists of a single Active Directory
domain named contoso.com. All servers run Windows Server 2003. All client computers run Windows XP
Professional. All computers are members of the domain.
The company has a main office and three branch offices. Each office is configured as an Active Directory
site. Each site contains domain controllers.
A domain user named Kim reports that she forgot her password. She works in one of the branch offices. A
desktop support technician in the main office resets Kim's password, enables the User must change
password at next logon option on Kim's user account, and then tells Kim the new password.
Kim attempts to log on by using her new password and reports that she cannot change the password at
logon.
You investigate the problem. Kim's user account is not locked out, and it is not disabled. Permissions for
the user account are shown in the exhibit. (Click the Exhibit button.) You need to ensure that Kim can log
on and change her password.
What should you do?
A.Assign the SELF group the Allow - Reset Password permission for Kim's user account.
B.Assign the SELF group the Allow - Allowed to Authenticate permission for Kim's user account.
C.Assign the Everyone group the Allow - Allowed to Authenticate permission for Kim's user account.
D.Enable the Let Everyone permissions apply to anonymous users security setting in the domain.
E.Reset Kim's password on a domain controller in her branch office.
Answer: E

Microsoft examen   070-299   certification 070-299   070-299 examen   070-299 examen

NO.3 You are a security administrator for your company. The network consists of an Active Directory forest
that contains two domains. The domains are named treyresearch.com and litwareinc.com. All Active
Directory domains are running at a Windows Server 2000 mixed mode functionality level. Employees in
the help desk department need to modify certain attributes of employee user accounts that reside in the
treyresearch.com domain. The help desk department user accounts reside in the litwareinc.com domain.
You need to create a single group named Help Desk that contains all help desk department user accounts
and that can be granted access to modify the employee user accounts in the treyresearch.com domain.
What should you do?
A.Use a universal security group in the treyresearch.com domain named Help Desk.
B.Use a universal security group in the litwareinc.com domain named Help Desk.
C.Use a global security group in the litwareinc.com domain named Help Desk.
D.Use a global security group in the treyresearch.com domain named Help Desk.
Answer: C

Microsoft   certification 070-299   070-299

NO.4 You are a security administrator for your company. The network includes a public key infrastructure (PKI)
that supports smart card logon. All client computers have smart card readers. Managers are issued smart
cards. Managers are required to use smart cards when logging on to client computers. You need to
ensure that managers are required to use a smart card when logging on to any client computer and that
all other users are required to use a smart card when logging on to a client computer assigned to a
manager. Which two actions should you perform? (Each correct answer presents part of the solution.
Choose two.)
A.On the properties of each user account used by a manager, select the Smart card required for
interactive logon check box.
B.On the computer account for each manager's client computer, edit the DACL so that only managers are
assigned the Allow - Allowed to authenticate permission.
C.Place all client computers used by managers in an organizational unit (OU). Link a new Group Policy
object (GPO) to the OU. Configure the GPO to enforce the Interactive logon: Require smart card setting.
D.Place all client computers used by managers in an organizational unit (OU). Link a new Group Policy
object (GPO) to the OU. Configure the GPO to set the startup type of the Smart Card service to
Automatic.
Answer: A C

certification Microsoft   070-299 examen   070-299   certification 070-299

NO.5 You are a security administrator for your company. The company has one main office and five branch
offices. Network administrators work in the main office and each branch office. Network administrators in
the main office frequently create scripts that automate common administrative tasks. You review each
script to ensure it does not introduce security vulnerabilities. Scripts that do not introduce security
vulnerabilities are considered approved. Occasionally, branch office administrators modify these scripts
and distribute the modified scripts to other branch office administrators. Branch office administrators often
report that they accidentally run a modified version of a script. You need to ensure that branch office
administrators can verify which scripts are approved scripts. What should you do?
A.Maintain a list of the dates that the approved scripts were last modified. Instruct branch office
administrators to verify the file modification date.
B.Digitally sign all approved scripts. Instruct branch office administrators to verify the signature before
using a script.
C.Distribute all approved scripts to branch office administrators in an e-mail message.
D.Place all approved scripts on a file server in the main office. Assign all branch office administrators only
the Allow - Read permission for the folder that contains the approved scripts. Instruct administrators to
copy scripts from this file server.
Answer: B

certification Microsoft   070-299   070-299   certification 070-299   070-299 examen

Si vous hésitez encore à nous choisir, vous pouvez tout d'abord télécharger le démo gratuit dans le site Pass4Test pour connaître mieux la fiabilité de Pass4Test. Nous avons la confiance à vous promettre que vous allez passer le test Microsoft 070-299 à la première fois.